Manual Einhell GE-CH 1846 Li (page 18 of 84) (English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish)

605771

Zoom out

Zoom in

1/84

- 18 -

6. Operation

Switching ON/OFF.

The hedge trimmer is equipped with a two-han-

ded safety switch. The machine works only when

the switch on the steady grip (Figure 1 / Item 3)

is pressed with one hand and the switch on the

handle (Figure 1 / Item 4) is pressed with the

other hand. If either switch is released, the cutters

will stop moving. Please watch out for the cutters

as they slow down to a standstill.

Notes on working practice

•

A hedge trimmer can be used to cut shrubs

and bushes as well as hedges.

•

To obtain the best cutting results, hold the

hedge trimmer so that the cutter teeth are

at an angle of approx. 15° in relation to the

hedge (see Figure 7).

•

The twin-bladed cutters rotate in opposite

directions, thus enabling cutting in both direc-

tions (see Figure 8).

•

It is recommended to tie a guide line of string

or the like along the hedge so that you cut the

hedge to a level height. Cut off all branches

which protrude beyond the guide line (see

Figure 9).

•

Cut the sides of the hedge with curve-shaped

movements from the bottom up (see Figure

10).

7. Cleaning, maintenance and

ordering of spare parts

Danger!

Turn oﬀ and remove the rechargeable battery

from the hedge trimmer, before putting down or

cleaning.

7.1 Cleaning

•

Keep all safety devices, air vents and the

motor housing free of dirt and dust as far as

possible. Wipe the equipment with a clean

cloth or blow it with compressed air at low

pressure.

•

We recommend that you clean the device

immediately each time you have finished

using it.

•

Clean the equipment regularly with a moist

cloth and some soft soap. Do not use

cleaning agents or solvents; these could at-

tack the plastic parts of the equipment. Ensu-

re that no water can seep into the device. The

ingress of water into an electric tool increases

the risk of an electric shock.

•

Remove deposits from the guard hood with a

brush.

7.2 Carbon brushes

In case of excessive sparking, have the carbon

brushes checked only by a qualiﬁ ed electrician.

Danger! The carbon brushes should not be

replaced by anyone but a qualiﬁ ed electrician.

7.3 Maintenance

•

The cutters should be cleaned and lubricated

at regular intervals in order to ensure best

performance at all times. Remove deposits

with a brush and apply a thin film of oil (Figure

11).

•

There are no parts inside the equipment

which require additional maintenance.

•

For storage, the hedge trimmer can be hung

up on a nail, screw or similar in a borehole on

the impact guard, with blade guard mounted

(Fig. 12)

7.4 Ordering replacement parts:

Please quote the following data when ordering

replacement parts:

•

Type of machine

•

Article number of the machine

•

Identification number of the machine

•

Replacement part number of the part required

For our latest prices and information please go to

www.isc-gmbh.info

8. Disposal and recycling

The equipment is supplied in packaging to pre-

vent it from being damaged in transit. The raw

materials in this packaging can be reused or

recycled. The equipment and its accessories are

made of various types of material, such as metal

and plastic. Never place defective equipment in

your household refuse. The equipment should

be taken to a suitable collection center for proper

disposal. If you do not know the whereabouts of

such a collection point, you should ask in your

local council oﬃ ces.

Anl_GE_CH_1846_Li_SPK7.indb 18Anl_GE_CH_1846_Li_SPK7.indb 18 18.07.14 15:1118.07.14 15:11

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Einhell GE-CH 1846 Li in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 1,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Einhell GE-CH 1846 Li Manual

Product: