Manual Einhell GE-BC 43 AS (page 27 of 112) (English, Danish, Swedish, Norwegian)

605943

Zoom out

Zoom in

1/112

- 27 -

Mowing

When mowing, you want to cut all the vegetation

down to the ground. To do this, set the line spool

at an angle of 30° to the right. Place the handle in

the required position. Remember the increased

risk of injury to the user, watchers and animals,

and the danger of damaging property due to ob-

jects (for example stones) being thrown up (Fig.

29).

Warning! Do not use the equipment to remove

objects from footpaths, etc. The equipment is a

powerful tool and can throw small stones and

other objects a distance of 15 meters or more,

causing injuries and damage to cars, houses and

windows.

Sawing

The equipment is not suitable for sawing.

Jamming

If the cutting blade jams as a result of attempting

to cut vegetation that is too dense, switch oﬀ the

engine immediately. Remove the grass and scrub

from the equipment before you restart it.

Preventing recoil

When you work with the blade, there is a risk of

recoil if it strikes solid objects such as tree trunks,

branches, tree stumps, stones or the like. This will

throw the equipment backwards in the direction

opposite to the rotation of the tool. This can cause

you to lose control of the equipment. Do not use

the blade near fences, metal posts, boundary

stones or foundations. For cutting dense stalks,

position the blade as shown in Fig. 30 to prevent

recoil.

9. Maintenance

Always switch oﬀ the equipment and pull out

the spark boot plug (13) before carrying out any

maintenance work.

9.1 Replacing the line spool/cutting line

1. Dismantle the line spool (3) as described in

section 5.6. Press the spool together (Fig. 35)

and remove one half of the housing (Fig. 36).

2. Take the spool plate (K) out of the line spool

housing (Fig. 37).

3. Remove any remaining cutting line.

4. Place the new cutting line in the center and

hang the loop which has formed into the re-

cess in the spool splitter. (Fig. 38)

5. Wind the line onto the spool counter-clockwi-

se and under tension. The spool splitter will

separate the two halves of the line. (Fig. 39)

6. Hook the last 15cm of the two ends of the

line onto the opposite lying line holders of the

spool plate. (Fig. 40)

7. Thread the two ends of the line through the

metal eyelets in the line spool housing (Fig.

36).

8. Press the spool plate into the line spool

housing (Fig. 36).

9. Pull the two line ends sharply to release them

from the line holders.

10. Join the housing parts together again.

11. Cut the excess line to a length of around

13cm. This will reduce the load on the engine

when starting and warming up.

12. Remount the line spool (see section 5.6). If

you are replacing the complete line spool,

skip points 3-6.

9.2 Grinding the safety hood blade

The safety hood blade can become blunt over

time. When you notice this, undo the screw hol-

ding the safety hood blade on the safety hood.

Clamp the blade in a vise. Sharpen the blade with

a ﬂ at ﬁ le and make sure that the angle of the cut-

ting edge is not altered in the process. File in one

direction only.

Anl_GE_BC_43_AS_SPK1.indb 27Anl_GE_BC_43_AS_SPK1.indb 27 09.10.13 17:4109.10.13 17:41

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Einhell GE-BC 43 AS in the language / languages: English, Danish, Swedish, Norwegian as an attachment in your email.

The manual is 2,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Einhell GE-BC 43 AS

Einhell GE-BC 43 AS User Manual - German, Dutch, French, Italian, Portuguese, Spanish - 88 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Einhell GE-BC 43 AS Manual

Product: