Manual Einhell GC-EC 750 T (page 7 of 76) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

605786

Zoom out

Zoom in

1/76

- 7 -

General safety instructions for electric tools

 Danger!

Read all safety regulations and instructions.

Any errors made in following the safety regula-

tions and instructions may result in an electric

shock, ﬁ re and/or serious injury.

Keep all safety regulations and instructions

in a safe place for future use.

The term “electric tool” used in the safety inst-

ructions refers to electric tools operated from the

mains power supply (with a power cable) and to

battery operated electric tools (without a power

cable).

1. Workplace safety

a) Keep your work area clean and well illu-

minated. Untidy or unlit work areas can result

in accidents.

b) Do not operate the electric tool in an en-

vironment where there is a risk of explo-

sions and where there are inﬂ ammable

liquids, gases or dust. Electric tools produ-

ce sparks which could set the dust or vapours

alight.

c) Keep the electric tool out of the reach of

children and other persons. If there is a

distraction, you may lose control of the appli-

ance.

2. Electrical safety

a) The connector plug from this electric tool

must ﬁ t into the socket. The plug should

never be altered in any way. Never use ad-

apter plugs together with earthed electric

tools. Unaltered plugs and correct sockets

reduce the risk of an electric shock.

b) Avoid bodily contact with earthed sur-

faces such as pipes, heating, ovens and

fridges. The risk of electric shock is increa-

sed if your body is earthed.

c) Keep the tool out of the rain and away

from moisture. The ingress of water into an

electric tool increases the risk of an electric

shock.

d) Do not use the cable to carry the electric

tool, to hang it up or to pull it out of the

socket. Keep the cable away from heat,

oil, sharp edges and moving parts of the

appliance. Damaged or entangled cables

increase the risk of an electric shock.

e) If you are working outdoors with an elec-

tric tool, only use extension cables which

are designed speciﬁ cally for this purpose.

Using specially designed outdoor extension

cables, the risk of electric shock is reduced.

f) If operation of the electric tool in a damp

environment can not be avoided, use a

earth-leakage circuit-breaker. The earth-

leakage circuit-breaker reduces the risk of an

electric shock.

3. Safety of persons

a) Be careful, watch what you are doing and

use an electric tool sensibly. Do not use

the tool if you are tired or under the inﬂ u-

ence of drugs, alcohol or medication. A

moment of inattention when using the electric

tool can result in serious injuries.

b) Wear personal protection equipment

and always wear safety goggles. Wearing

personal protection (such as dust masks,

non-slip safety shoes, safety helmet or ear

protection, depending upon the type and use

of the electric tool) reduces the risk of injury.

c) Make sure that the appliance cannot start

up accidentally. Ensure that the electric

tool is switched oﬀ before you connect

it to the power supply and/or insert the

battery, or pick up or carry the tool. If your

ﬁ nger is on the switch whilst carrying the elec-

tric tool or if you connect the appliance to the

mains when it is switched on, this can lead to

accidents.

d) Remove keys and wrenches before swit-

ching on the electric tool. A tool or key

which comes into contact with rotating parts

of the appliance can lead to injuries.

e) Avoid abnormal working postures. Make

sure you stand squarely and keep your

balance at all times. In this way, you can

control the electric tool better in unexpected

circumstances.

f) Wear suitable work clothes. Do not wear

loose clothing or jewellery. Keep hair, clo-

thes and gloves away from moving parts.

Loose clothing, jewellery or long hair can get

trapped in moving parts.

g) If vacuuming devices and draining de-

vices can be ﬁ tted, make sure that these

are correctly attached and correctly used.

The use of a dust extraction system can redu-

ce the danger posed by dust.

Do not lose this safety information.

SiHi_GC_EC_750_T_SPK7.indb 7SiHi_GC_EC_750_T_SPK7.indb 7 16.09.14 16:2216.09.14 16:22

that's not a user manual but a safety manual. Necessary but not clearly useful Submitted on 16-4-2021 at 12:39
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Einhell GC-EC 750 T in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Einhell GC-EC 750 T Manual

Product: