Manual Einhell GC-AW 9036 (page 16 of 132) (English, German, Dutch, French, Italian, Portuguese, Swedish, Turkish, Spanish, Finnish)

605889

Zoom out

Zoom in

1/132

- 16 -

Operating the ﬂ ow switch:

The ﬂ ow switch cannot be adjusted or switched,

it is fully automatic. There are only 3 LEDs which

indicate its operating status.

The following operating statuses are indica-

ted:

Green and yellow are lit:

The pump is in operation and starts up immedia-

tely; a consumer for drawing o transport ﬂ uid is

open.

Green and red are lit:

1. The pump is building up pressure (e.g. a

water tap is closed) and then switches o au-

tomatically.

2. The pump is running dry without transport

ﬂ uid. The ﬂ ow switch will make 3 attempts to

eliminate the dry running before the dry run-

ning guard ﬁ nally trips.

Green is lit, red is ﬂ ashing:

The dry running guard has tripped; it is no longer

possible to draw in the transport ﬂ uid. Use the

pump’s operating manual to ﬁ nd the cause of the

fault (e.g. a leaking intake line) and rectify it. Then

restart the pump by pressing the Reset button on

the ﬂ ow switch.

7. Replacing the power cable

Danger!

If the power cable for this equipment is damaged,

it must be replaced by the manufacturer or its

after-sales service or similarly trained personnel

to avoid danger.

8. Cleaning, maintenance and

ordering of spare parts

The equipment is almost completely maintenance

free. In order to ensure a long service life, howe-

ver, we recommend that you regularly check and

care for the product.

Danger!

The equipment must be disconnected from the

power supply (pull the power plug) prior to perfor-

ming any maintenance.

8.1 Servicing

•

If the equipment becomes clogged, connect

the discharge line to the water line and dis-

connect the suction hose. Open the water

line. Switch on the equipment several times

for approx. two seconds. This should resolve

the majority of clog-related problems.

•

There are no parts inside the equipment

which require additional maintenance.

8.2 Cleaning the coarse ﬁ lter insert

•

Clean the coarse filter insert at regular inter-

vals, and replace it if necessary.

•

Remove the coarse filter screw and coarse

filter together with the non-return valve.

•

Do not use abrasive cleaning agents or petrol

to clean the coarse filter and the non-return

valve.

•

Clean the coarse filter and the non-return val-

ve by tapping them on a flat surface. In cases

of stubborn dirt, first clean with soapy water,

then rinse with clear water and air-dry.

•

Assemble in reverse order.

8.3 Ordering replacement parts:

Please quote the following data when ordering

replacement parts:

•

Type of machine

•

Article number of the machine

•

Identification number of the machine

•

Replacement part number of the part required

For our latest prices and information please go to

www.isc-gmbh.info

Anl_GC_AW_9036_SPK7.indb 16Anl_GC_AW_9036_SPK7.indb 16 23.06.14 16:3823.06.14 16:38

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Einhell GC-AW 9036 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Turkish, Spanish, Finnish as an attachment in your email.

The manual is 1,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Einhell GC-AW 9036 Manual

Product: