2.2 Items supplied
n Open the packaging and take out the equipment
with care.
n Remove the packaging material and any
packaging and/or transportation braces (if
available).
n Check to see if all items are supplied.
n Inspect the equipment and accessories for
transport damage.
n If possible, please keep the packaging until the
end of the guarantee period.
Danger!
The equipment and packaging material are not
toys. Do not let children play with plastic bags,
foils or small parts. There is a danger of
swallowing or suffocating!
n Energy station
n Original operating instructions
3. Proper use
The equipment is suitable for the jump starting of 12 V
starter batteries (lead acid batteries) with too little
battery capacity and for the direct or indirect
connection of 12 V consumers with max. 10A power
consumption to the cigarette lighter socket. Be sure to
observe the operating instructions of the equipment
which you connect to the energy station. With the
integrated 12 V car compressor you can inflate car,
motorcycle and bicycle tires as well as sports balls,
small water balls, small air mattresses and other
similar items.
The equipment is not suitable for jump starting Diesel
engines or for filling high-pressure tires (trucks,
caravans and the like) and voluminous inflatable
articles.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Storage battery: 12 V / 8 Ah
Output voltages /max. current consumption:
12 V / 10 A via 1 cigarettelighter socket
Mains voltage power supply unit: 230 V ~ 50 Hz
Output from power supply unit:
Nominal voltage: 12 V
Nominal current: 600 mA
Nominal power: 7.2 VA
Lamp 12 V / 0,3 A
Compressor 12 V/18 bar
Danger!
Keep the noise emissions and vibrations to a
minimum.
n Only use appliances which are in perfect working
order.
n Service and clean the appliance regularly.
n Adapt your working style to suit the appliance.
n Do not overload the appliance.
n Have the appliance serviced whenever
necessary.
n Switch the appliance off when it is not in use.
n Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain residual
risks cannot be rules out. The following hazards
may arise in connection with the equipment’s
construction and layout:
1. Damage to hearing if no suitable ear protection is
used.
5. Charging the energy station
Before you connect the equipment to the power
supply make sure that the data on the rating plate are
identical to the supply voltage. Warning! Pull out the
power plug before making adjustments to the
equipment.
5.1 Charging the energy station with the power
supply unit
1. Plug the connecting cable of the supplied power
supply unit in the charging socket „RECHARGE“
(Figure 1 / Item 2) on the unit.
2. Plug the power supply unit into a mains socket
outlet for 230 V ~ 50 Hz. The red LED indicator
14
GB
