8.6 Cleaning the intake air filter (Fig. 7, 8)
The intake filter prevents dust and dirt being drawn in.
Clean this filter at least every 300 hours. In
environments with increased dust and dirt pollution
the cleaning process must be carried out more
frequently.
A clogged intake filter will decrease the compressor’s
performance dramatically. Only use the compressor
with an intact intake air filter.
Remove the filter from the compressor by unscrewing
the two screws (L).
Remove the filter foam (N) from the two housing parts
of the filter (M, O). Clean the filter material by tapping
and blowing it at low pressure (approx. 3 bar).
Assemble and fit the intake air filter in reverse.
8.7 Storage
Important!
Pull the mains plug out of the socket and ventilate
the appliance and all connected pneumatic tools.
Switch off the compressor and make sure that it is
secured in such a way that it cannot be started up
again by any unauthorized person.
Important!
Store the compressor only in a dry location
which is not accessible to unauthorized persons.
Always store upright, never tilted!
8.8 Ordering replacement parts
Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
9. Disposal and recycling
The unit is supplied in packaging to prevent its being
damaged in transit. This packaging is raw material
and can therefore be reused or can be returned to
the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic.
Defective components must be disposed of as
special waste. Ask your dealer or your local council.
GB
18
