Manual Einhell BPS 520E (page 8 of 17) (English, Italian, Finnish)

573476

Zoom out

Zoom in

1/17

Changing the saw

blade

Releasing the saw blade:

Turn screw anticlockwise.

Locking button

On/Off switch

Insert the saw blade in the

ram up to the stop and

tight the screw of the

retention clip.

Important: Make sure that

the saw blade sits pro-

perly in the slot of the rol-

ler and ram.

Switching on: Press the On/Off switch

Continuous operation: Lock the On/Off switch with the

locking button

Switching off: Press the On/Off switch

and release

Turn the speed controller to increase the

cutting rate

Undo the two screws to set the base to an angle of up to

45° on the right or left side.

Cutting holes: Possible only in chipboard and wood unless

you drill a hole first. Press the jigsaw firmly against the

support and move slowly in cutting direction.

Cutting veneered chipboard:

1. Use a fine saw blade

2. Position the base on the uncovered area

3. Advance the saw with little force

Support

45°

30°

45°

15°

0°

30°

15°

0°

BPS 520 E-GB,I,FIN 10.07.2001 10:37 Uhr Seite 6

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Einhell BPS 520E in the language / languages: English, Italian, Finnish as an attachment in your email.

The manual is 0,39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Einhell BPS 520E Manual

Product: