605913

Einhell BG-MT 3336 Manual

19
Zoom out
Zoom in
Previous page
1/76
Next page
19
GB
9. Troubleshooting guide
Warning: Switch off the engine and pull out the ignition cable before making any checks or adjustments.
Warning: If, after making an adjustment or repair to the engine, you let it run for a few minutes, remember
that the exhaust and other parts will get hot. Do not touch these parts as these may burn you.
Fault Possible causes Remedy
The unit does not operate smoothly
and vibrates intensively
- Bolts loose
- Spark plug defective
- Check bolts
- Replace spark plug
The engine does not start - Throttle lever in wrong position
- Spark plug defective
- Fuel tank empty
- Petrol cock closed
- Check setting
- Replace spark plug
- Top up fuel
- Open petrol cock
Engine does not run smoothly - Air filter dirty
- Spark plug soiled or defective
- Clean the air filter
- Clean or replace the spark plug
Drive power falls - Clutch play too large
- V-belt loose
- Adjust clutch cable
- Contact authorized customer
service
The engine will not start or dies
after a short period of time
- Spark plug foul
- No fuel
- Clean or replace spark plug
(electrode spacing 0.6 mm)
- Top up fuel
7.4 Ordering spare parts
Please provide the following information on all orders
for spare parts:
Model/type of machine
Article number of the machine
ID number of the machine
Number of the required spare part
For our latest prices and information please go to
www.isc-gmbh.info
8. Disposal and recycling
The unit is supplied in packaging to prevent its being
damaged in transit. This packaging is raw material
and can therefore be reused or can be returned to
the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic.
Defective components must be disposed of as
special waste. Ask your dealer or your local council.
Anleitung_BG-MT_3336_SPK1:_ 29.03.2011 14:17 Uhr Seite 19
… 19 …


Need help? Post your question in this forum.

Forumrules
1

Forum

einhell-bg-mt-3336

Reset search

  • Hello
    I have problem how is connected the speed adjust system.
    The stop and air system works good but the speed the did is not respond increasing I
    If you have a diagram of the connection Submitted on 30-4-2017 at 21:33

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Einhell BG-MT 3336 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Einhell BG-MT 3336 in the language / languages: English, Danish, Swedish, Norwegian as an attachment in your email.

The manual is 3,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Einhell BG-MT 3336

Einhell BG-MT 3336 User Manual - German, Dutch, French, Italian, Portuguese, Spanish - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info