Manual Einhell BG-EM 1030 (page 24 of 102) (English, Danish, Swedish, Norwegian)

509379

Zoom out

Zoom in

1/102

- 24 -

As soon as you see mown grass on the lawn

whilst you are mowing, the grass bag will need

emptying.

Important!

Before you remove the grass bag switch oﬀ the

motor and wait until the cutting tool reaches a

standstill.

To remove the grass bag, raise the discharge ﬂ ap

with one hand and remove the grass bag using its

handle with your other hand. To maintain safety,

the discharge ﬂ ap will close when you remove the

grass back to seal the rear discharge opening. If

any grass residues are caught in the opening, it is

a good idea to pull the mower backwards around

1 m to make it easier to start the motor. Do not

remove grass cuttings in the mower casing or on

the cutter by hand or with your feet. Instead use

suitable tools such as a brush or broom. To ensu-

re that it can collect the grass correctly the grass

bag and in particular the net must be cleaned

from the inside after use. Only attach the grass

bag after switching oﬀ the motor and the cutting

tool has reached a standstill. Raise the discharge

ﬂ ap with one hand and, holding the grass bag by

its handle in your other hand, attach it from the

top.

7. Replacing the power cable

If the power cable for this equipment is damaged,

it must be replaced by the manufacturer or its

after-sales service or similarly trained personnel

to avoid danger.

8. Cleaning, maintenance and

ordering of spare parts

Always pull out the mains power plug before star-

ting any cleaning work.

8.1 Cleaning

•

Keep all safety devices, air vents and the

motor housing free of dirt and dust as far as

possible. Wipe the equipment with a clean

cloth or blow it with compressed air at low

pressure.

•

We recommend that you clean the device

immediately each time you have finished

using it.

•

Clean the equipment regularly with a moist

cloth and some soft soap. Do not use

cleaning agents or solvents; these could at-

tack the plastic parts of the equipment. Ensu-

re that no water can seep into the device. The

ingress of water into an electric tool increases

the risk of an electric shock.

8.2 Carbon brushes

In case of excessive sparking, have the carbon

brushes checked only by a qualiﬁ ed electrician.

Important! The carbon brushes should not be rep

laced by anyone but a qualiﬁ ed electrician.

8.3 Maintenance

•

Worn out or damaged blades, blade mounts,

and bolts should be replaced as a set by an

authorized professional in order to keep the

equipment in balance.

•

Do not clean the lawn mower with running

water, particularly with high-pressure water.

Ensure that all mounting components (i.e.

screws, bolts, nuts etc.) are always tightened

so that the equipment can be safely operated

at all times.

•

Frequently check the grass catch assembly

for signs of wear.

•

Replace excessively worn or damaged parts

immediately.

•

Store your lawn mower in a dry room.

•

In order to ensure that you enjoy the equip-

ment for many years to come, all screwed

parts, as well as the wheels and axles, should

be cleaned and lubricated.

•

Keeping your lawn mower in good condition

not only ensures a long lifespan and high per-

formance, but also enables the equipment to

thoroughly cut your grass with minimal effort.

For best results, clean the lawn mower with a

Anl_BG_EM_1030_SPK1.indb 24Anl_BG_EM_1030_SPK1.indb 24 13.02.14 10:2113.02.14 10:21

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Einhell BG-EM 1030 in the language / languages: English, Danish, Swedish, Norwegian as an attachment in your email.

The manual is 2,42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Einhell BG-EM 1030

Einhell BG-EM 1030 User Manual - German, Dutch, French, Italian, Portuguese, Spanish - 56 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Einhell BG-EM 1030 Manual

Product: