381465
7
Zoom out
Zoom in
Previous page
1/24
Next page
The battery charger does not switch off
automatically when the battery is fully
charged. The red LED extinguishes as soon as
the battery pack is removed from the charging
adapter.
If the battery pack fails to charge, please check
Ȝ whether there is voltage at the socket-outlet
Ȝ whether there is good contact at the charging
contacts
If the battery pack still fails to charge, we request
that you send
Ȝ the battery charger with charging adapter
Ȝ and the rechargeable battery pack
to our customer services department.
To ensure that the NC battery pack provides long
service, you should take care to recharge it
promptly. You must recharge the battery pack when
you notice that the power of the hammer screwdriver
drops.
Never allow the battery pack to become fully
discharged. This will cause it to develop a defect.
6.2 Changeover switch
Using the slide switch above the ON/OFF switch you
can select the direction of rotation of the hammer
screwdriver and lock the screwdriver so that it
cannot be switched on accidentally. You can select
between clockwise and counter-clockwise rotation.
In order to avoid causing damage to the gearing, the
direction of rotation must only be changed when the
screwdriver is at a standstill. When the slide switch
is in the middle position, the ON/OFF switch is
blocked.
6.3 ON/OFF switch
Infinitely variable speed control is possible with the
ON/OFF switch. The further you push the switch, the
higher the speed of the cordless hammer
screwdriver.
6.4 Tightening screws / nuts
Plug the required drive socket insert on the square
drive mount. Select the correct direction of rotation
on the hammer screwdriver. Push the drive socket
insert onto the screw head and actuate the ON/OFF
switch.
For as long as the screw / nut is untightened, the
tool works as a normal screwdriver. Only when the
screw / nut is tightened does the tool work as a
hammer screwdriver.
It is imperative that you use a torque wrench to
check a torque which has been specified by a
manufacturer. In doing so, ensure that you observe
the information supplied by the manufacturer in the
directions for use.
Most mounting parts can be tightened within a few
seconds. The time required to achieve the maximum
torque depends on the actual case of application
and can be determined with experience.
6.5 Loosening screws / nuts
For as long as the screw / nut is tightened, the tool
works as a hammer screwdriver. As soon as the
screw / nut is untightened, the tool operates as a
normal screwdriver.
7
GB
!
ᪿ
iNTERNATiONALES SERViCE CENTER GmbH
Rechargeable batteries and cordless electric
machines and tools contain materials that are potentially
harmful to the environment. Never place any cordless
electric machines or tools in your household refuse.
When cordless electric machines or tools become
defective or worn, remove the rechargeable batteries and
return them to iSC GmbH Eschenstrasse 6, D-94405
Landau, Germany. If the rechargeable batteries cannot
be removed, return the complete cordless machine or
tool. You can then be sure that the equipment will be
correctly
Anleitung ASS 18 SPK 1 03.09.2004 7:54 Uhr Seite 7
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Einhell ass 18 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Einhell ass 18 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info