571152
19
Zoom out
Zoom in
Previous page
1/27
Next page
395823110a 19
Loading the appliance full of damp wood on a low setting, is certain to
cause poor combustion efficiency resulting in tar and dirty glass.
Always allow the stove to recover before closing for long burning.
Overnight burning
If you fill your appliance with wood and close all air supplies, it is possible
to achieve overnight burning, though it is probable that the glass door will
become dirty.
To keep the glass clean, we recommend you do not shut the primary air
control completely but to leave it slightly open, depending on how the
chimney draws, to achieve slow burning for a maximum of eight to ten
hours (with dry, good quality wood such as oak…). With a good drawing
chimney the air control will need to be closed further than with poor
drawing chimneys.
Disposal of Ashes
Empty the ash pan regularly to prevent the ash from spilling over. Do not
allow ash to build up and touch the under side of the grate. A layer of ash
left over the grate when burning wood will protect the grate, retain heat,
and promote clean combustion.
CAUTION: ASH PAN MAY BE HOT. USE HIGH TEMPERATURE
GLOVES.
To remove the ash from the stove, operate the oscillating grate using the
handle provided. Open the ash pan door, attach handle to ash pan and
remove. Place cover over ash pan. The tool provided for removal of
the ash pan should not be used to carry the ash pan. Use gloves and
hold ash pan on both sides.
Place ashes in a metal container with a tight fitting lid. The closed
container of ashes should be placed on a non-combustible floor or on the
ground, well away from all combustible materials, pending final disposal.
If the ashes are disposed of by burial in soil or otherwise locally dispersed,
they should be retained in the closed container until all cinders have
thoroughly cooled.
19


Need help? Post your question in this forum.

Forumrules
1

Forum

efel-harmony-i

Reset search

  • How do I remove the side loading door to replace a seized and now sheared handle spindle in order to replace the handle and spindle Submitted on 7-6-2021 at 18:29

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Efel HARMONY I at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Efel HARMONY I in the language / languages: English as an attachment in your email.

The manual is 2,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Efel HARMONY I

Efel HARMONY I User Manual - German, Dutch, French - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info