Manual Efel HARMONY I (page 9 of 27) (English)

571152

Zoom out

Zoom in

1/27

395823110a 9

Standard Installation

1. Position the unit no closer than the minimum clearances to combustible

materials. Check that no overhead cross members in the ceiling or roof will be

cut. Reposition unit if necessary, being careful not to move closer than the

minimum clearances.

2. A non-combustible floor protector (hearth extension) must be installed under

the unit. The floor protector must extend a minimum of 16 inches (450 mm)

beyond the front and side doors and 8 inches (200 mm) beyond the left side.

The floor protector must be equivalent to 1/2 inch (9.5mm) with a k factor of at

least 0.84 Btu/inch°F

Determining Thickness Requirements of Alternate Floor Protection Materials

The following formula gives the means of determining thickness of alternate

materials:

k of the alternate material x thickness of = thickness of

k of the specified material specified material alternate material

For example common brick has a k value of 5.0. The following would

determine the thickness necessary:

5.0 x 1/2 inch = 3.0 inches of common brick

0.84

3. Mark the position of the required floor protector on the floor. Remove the unit

and install the floor protector.

4. Position the unit on the floor protector at the proper clearances.

5. Install a 6-inch diameter, minimum 24 MSG black or 26 MSG blued steel

connector pipe on the flue collar of the unit.

• The stove is NOT to be connected to any air distribution duct or system.

• A chimney connector shall not pass through an attic or roof space,

closet or similar concealed space, or a floor, or ceiling. Where passage

through a wall or partition of combustible construction is desired, the

installation shall conform to CAN/CSA-B365, Installation Code for Solid-

Fuel-Burning Appliances and Equipment. (Canadian installations only )

6. Use a chimney connector adapter to connect the chimney connector up to the

chimney. The small ends of the chimney connector should all point down for a

drip free installation. Position all seams toward the back for aesthetics. The

chimney connector must be 6-inch diameter.

How do I remove the side loading door to replace a seized and now sheared handle spindle in order to replace the handle and spindle Submitted on 7-6-2021 at 18:29
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Efel HARMONY I in the language / languages: English as an attachment in your email.

The manual is 2,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Efel HARMONY I

Efel HARMONY I User Manual - German, Dutch, French - 21 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Efel HARMONY I Manual

Product: