644155
33
Zoom out
Zoom in
Previous page
1/42
Next page
English
71
14 Maintenance
Warning!
Injuries due to the cutting blades!
Always switch off the robot lawnmower
at the [ON/OFF key] before starting
maintenance and repair work.
Always wear working gloves when
carrying out maintenance and care
jobs on the blade system.
Disconnect the transformer of the base
station from the mains.
Important!
Damage to the electrical/electronic system
by incorrect cleaning!
Do not clean the robot lawnmower with
a high-pressure cleaner or under running
water. Water penetration can cause
irreparable damage to the switch, battery
and circuit boards.
Entrust all repairs (apart from replacement of the blades) to
specialist workshops approved by the manufacturer.
The user is under obligation:
1. To bring the robot mower to the workshop after
between 100 and 200 hours operation, for:
Check on tightness of bolts
General check on programming and detection of
possible errors
2. To bring the robot mower to the workshop after 500
and 2500 hours operation, for:
General check on tightness of bolts and mechanical
parts
Check on error statistics
Check on battery status
Check on wheel bearings
Inspection of blade and check for possible damage
General inspection and cleaning
Operations to be carried out periodically by the user
Once a week, clean the robot lawnmower thoroughly
with a hand brush or a cloth, and use care spray if
necessary. Contamination can impair the function of
the machine if not removed.
Once a week, check the cutting blades for damage.
14.1 Check the rollers can move freely
1
1 Once a week, thoroughly clean the area around the rollers
(1) with a hand brush or cloth.
2 Check the rollers (1) can move and steer freely. If the rollers
(1) do not move freely, they must be freed up or renewed.
14.2 Checking/cleaning contacts
1
Check the contact surfaces (1) on the robot lawnmower for
contamination.
Clean the contact surfaces (1) on the robot lawnmower
with a cloth if necessary.
Charring on the contact surfaces indicates a poor charging
contact.
Bend the springs on the base station outwards.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Efco Sirius 700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Efco Sirius 700 in the language / languages: English as an attachment in your email.

The manual is 4,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Efco Sirius 700

Efco Sirius 700 User Manual - German - 42 pages

Efco Sirius 700 User Manual - Dutch - 42 pages

Efco Sirius 700 User Manual - French - 42 pages

Efco Sirius 700 User Manual - Italian - 42 pages

Efco Sirius 700 User Manual - Spanish - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info