644135
50
Zoom out
Zoom in
Previous page
1/60
Next page
50
TABELLA DI MANUTENZIONE
Vi preghiamo di notare che i seguenti intervalli di manutenzione si applicano solamente per le
normali condizioni di funzionamento. Se il vostro lavoro quotidiano è più gravoso rispetto al
normale gli intervalli di manutenzione devono essere ridotti di conseguenza.
Prima di ogni
utilizzo
Dopo ogni sosta per
il rifornimento
Settimanalmente
Se danneggiato o
difettoso
Macchina completa Ispezionare: perdite, crepe e usura
XX
Controlli: interruttore, starter, leva acceleratore e
leva fermo acceleratore
Veri care il funzionamento
XX
Freno catena Veri care il funzionamento
XX
Controllare da un Riparatore Autorizzato
X
Serbatoio carburante e serbatoio olio Ispezionare: perdite, fessure e usura
XX
Filtro carburante Ispezionare e pulire
X
Sostituire elemento  ltrante
X
Lubri cazione catena Controllare rendimento
XX
Catena Ispezionare: danni, a latura e usura
XX
Controllare la tensione
XX
A lare: controllare profondità di passata
X
Barra Ispezionare: danni e usura
XX
Pulire scanalatura e condotto olio
X
Ruotare, lubri care rocchetto e sbavare
X
Sostituire
X
Pignone Ispezionare: danni e usura
X
Sostituire
X
Frizione Ispezionare: danni e usura
X
Sostituire
X
Arresto catena Ispezionare: danni e usura
XX
Sostituire
X
Tutte le viti e i dadi accessibili (escluse viti
carburatore)
Ispezionare e riserrare
X
Filtro aria Pulire
X
Sostituire
X
Alette cilindro e feritoie carter avviamento Pulire
X
Corda di avviamento Ispezionare: danni e usura
X
Sostituire
X
Carburatore Controllare il minimo (la catena non deve girare
al minimo)
XX
Candela Controllare distanza elettrodi
X
Sostituire
X
Sistema antivibrante Ispezionare: danni e usura
X
MAINTENANCE CHART
Please note that the following maintenance intervals apply for normal operating conditions only. If
your daily work requires longer than normal or harsh cutting conditions are present the suggested
intervals should be shortened accordingly.
Before Each Use
After Each
Refueling Stop
Weehly
If Damaged or
Faulty
Complete Machine Inspect (Leaks, Cracks, and Wear)
XX
Controls (Ignition Switch, Choke Lever, Throttle
Trigger, Trigger Interlock)
Check Operation
XX
Chain Brake Check Operation
XX
Check by Dealer
X
Fuel Tank and Oil Tank Inspect (Leaks, Cracks, and Wear)
XX
Fuel Filter Inspect and Clean
X
Replace Filter Element
X
Chain Lubrication Check Output
XX
Saw Chain Inspect (Damage, Sharpness, and Wear)
XX
Check Tension
XX
Sharpen (Check Gauge Depth)
X
Guide Bar Inspect (Damage, and Wear)
XX
Clean Bar groove and Oil Passages
X
Rotate, Lubricate Sprocket Nose and Deburr
X
Replace
X
Rim Sprocket Inspect (Damage, and Wear)
X
Replace
X
Clutch Drum Inspect (Damage, and Wear)
X
Replace
X
Chain Catcher Inspect (Damage, and Wear)
XX
Replace
X
All Accessible Screws and Nuts (not Adjusting
Screws)
Inspect - Retighten
X
Air Filter Clean
X
Replace
X
Cylinder Fins and Starter System Vents Clean
X
Starter Rope Inspect (Damage, and Wear)
X
Replace
X
Carburetor Check Idle (Chain must not rotate at Idle)
XX
Spark Plug Check Electrode Gap
X
Replace
X
Vibration Mounts Inspect (Damage and Wear)
X
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Efco MT8200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Efco MT8200 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info