644124

Efco MT4100S Manual

18
Zoom out
Zoom in
Previous page
1/64
Next page
18
19
2% - 50:1 4% - 25:1
ℓℓ
(cm
3
)
ℓ
(cm
3
)
1
5
10
15
20
25
0,02
0,10
0,20
0,30
0,40
0,50
(20)
(100)
(200)
(300)
(400)
(500)
0,04
0,20
0,40
0,60
0,80
1,00
(40)
(200)
(400)
(600)
(800)
(1000)
2017
p.n. 4175158
18
001001533
001001364
001001363
001001534
Italiano English Français
AVVIAMENTO STARTING MISE EN ROUTE
CARBURANTE
Questo prodotto è azionato da un motore a 2 tempi e richiede
la premiscelazione di benzina e olio per motori a 2 tempi.
Premiscelare la benzina senza piombo e l’olio per motori a due
tempi in un contenitore pulito approvato per la benzina (Fig.17).
CARBURANTE CONSIGLIATO: QUESTO MOTORE È CERTIFICATO
PER FUNZIONARE CON BENZINA SENZA PIOMBO PER USO
AUTOMOBILISTICO A 89 OTTANI ([R + M] / 2) O CON UN NUMERO
MAGGIORE DI OTTANI (Fig.18).
Miscelare l’olio per motori a 2 tempi con la benzina secondo le
istruzioni sulla confezione.
Consigliamo di usare olio per motori a 2 tempi Efco al 2% (1:50)
formulato specificamente per tutti i motori a due tempi raffreddati
ad aria Efco.
Le proporzioni corrette di olio/carburante indicate nel prospetto
(Fig.19) sono idonee quando si usa olio per motori Efco PROSINT 2
e EUROSINT 2 (Fig.20) o un olio motore di alta qualità equivalente
(specifiche JASO FD o ISO L-EGD). Quando le specifiche dell’olio
NON sono equivalenti o non sono note, usare un rapporto di
miscelazione olio/carburante del 4% (1:25).
CAUTELA: NON USARE OLIO PER AUTOVEICOLI O OLIO PER
MOTORI FUORIBORDO A 2 TEMPI.
CAUTELA: non usare mai un carburante con una
percentuale di alcool maggiore del 10%; sono accettabili
gasohol con una percentuale di alcool fino al 10% o
carburante E10.
CAUTELA:
Acquistare solo il quantitativo di carburante necessario -
in base ai propri consumi; non acquistarne più di quanto
se ne userà in uno o due mesi;
Conservare la benzina in un contenitore chiuso -
ermeticamente, in un luogo fresco e asciutto.
NOTA: l’olio per motori a due tempi contiene stabilizzatore per
carburante e rimane fresco per 30 giorni. NON miscelare quantitativi
maggiori di quelli utilizzabili in un periodo di 30 giorni. Si consiglia
olio per motori a 2 tempi contenente stabilizzatore per carburante
(Emak ADDITIX 2000 - cod. art. 001000972 – Fig.21).
RIFORNIMENTO (Fig.23)
Agitare la tanica della miscela prima di procedere al rifornimento
(Fig.22).
FUELING
This product is powered by a 2-cycle engine and requires pre-
mixing gasoline and 2-cycle oil. Pre-mix unleaded gasoline and
2-cycle engine oil in a clean container approved for gasoline
(Fig.17).
RECOMMENDED FUEL: THIS ENGINE IS CERTIFIED TO OPERATE ON
UNLEADED GASOLINE INTENDED FOR AUTOMOTIVE USE WITH AN
OCTANE RATING OF 89 ([R + M] / 2) OR HIGHER (Fig.18).
Mix 2-cycle engine oil with gasoline according to the instructions
on the package.
We strongly recommend the use of 2% (1:50) Efco two cycle
engine oil, which is specifically formulated for all Efco air-cooled
two-stroke engines.
The correct oil / fuel proportions shown in the table (Fig.19) are
suitable when using the Efco PROSINT 2 and EUROSINT 2 (Fig.20)
or an equivalent high-quality engine oil (JASO specification FD
or ISO specification L-EGD).When oil specifications are NOT
equivalent or unknown use 4% (1:25) oil / fuel mixing ratio.
CAUTION: DO NOT USE AUTOMOTIVE OIL OR 2-CYCLE
OUTBOARD OIL.
CAUTION: Never use a fuel with an alcohol percentage
higher than 10%; gasohol up to 10% alcohol or E10 fuel
are acceptable.
CAUTION:
Match your fuel purchases to your consumption; don’t -
buy more than you will use in one or two months;
Store gasoline in a tightly-closed container in a cool, dry -
place.
NOTE: 2-cycle engine oil contains a fuel stabilizer and will stay fresh
up to 30 days. DO NOT mix quantities larger than usable in a 30 day
period. A 2-cycle oil containing a fuel stabilizer is recommended
(Emak ADDITIX 2000 p.n. 001000972 – Fig.21).
FILLING THE TANK (Fig.23)
Stir the mixture well before refuelling (Fig.22).
CARBURANT
Cet appareil est actionné par un moteur 2 temps et nécessite le
prémélange d'essence et d'huile pour moteurs 2 temps. Prémélangez
l'essence sans plomb et l'huile pour moteurs 2 temps dans un
récipient propre homologué pour contenir de l'essence (Fig.17).
CARBURANT CONSEILLÉ : CE MOTEUR EST CERTIFIÉ POUR ÊTRE
ALIMENTÉ EN ESSENCE SANS PLOMB POUR USAGE AUTOMOBILIE
AVEC NIVEAU D'OCTANES 89 ([R + M] / 2) OU SUPÉRIEUR (Fig.18).
Mélangez l'huile pour moteurs 2 temps avec l'essence en suivant
les instructions sur l'emballage.
Il est conseillé d'utiliser de l'huile pour moteurs 2 temps Efco à
2% (1:50)
spécialement formulée pour tous les moteurs 2 temps
refroidis par air Efco.
Les proportions correctes huile/essence illustrées dans la notice (Fig.19)
sont adaptées à l'utilisation d'huile pour moteurs Efco PROSINT 2 et
EUROSINT 2 (Fig.20) ou d'huile moteur de haute qualité équivalente
(spécifications JASO FD ou ISO L-EGD). Quand les spécifications de
l'huile NE SONT PAS équivalentes ou ne sont pas connues, utilisez un
rapport de mélange huile/essence de 4% (1:25).
ATTENTION : NE PAS UTILISER D'HUILE POUR
AUTOMOBILES OU POUR MOTEURS HORS-BORD 2 TEMPS.
ATTENTION : N'utilisez jamais de carburant dont
le pourcentage d'alcool dépasse 10% ; le gazole avec
pourcentage d'alcool jusqu'à 10% ou l'essence E10 sont
acceptés.
ATTENTION :
N'achetez que la quantité de carburant nécessaire en -
fonction des consommations personnelles ; n'en achetez
pas plus qu'il n'en sera utilisé en un ou deux mois ;
Conservez l'essence dans un récipient hermétique, dans -
un endroit frais et sec.
REMARQUE : l'huile pour moteurs 2 temps contient un stabilisateur
pour carburant et reste fraîche pendant 30 jours. NE mélangez PAS
des quantités supérieures à celles utilisables sur une période de 30
jours. Il est recommandé d'utiliser une huile pour moteurs 2 temps
contenant un stabilisateur pour carburant (Emak ADDITIX 2000 -
réf. art. 001000972 – Fig.21).
RAVITAILLEMENT (Fig.23)
Secouez le jerrycan du mélange avant de procéder au ravitaillement
(Fig.22).
BENZINA - ESSENCE
GASOLINE - BENZIN
GASOLINA - BENZINE
OLIO - HUILE - OIL
ÖL - ACEITE - OLIE
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Efco MT4100S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Efco MT4100S in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info