644119
36
Zoom out
Zoom in
Previous page
1/202
Next page
32
I
GB
F
D
E
SK
P
GR
TR
CZ
RUS
UK
PL
9. STORAGE
If the machine is to be stored for long periods:
- Make see that the electrical plug is
disconnected from the mains.
- Follow all the maintenance regulations
described above.
- Completely empty the tank of chain
lubricant and close the cap
- Run the machine empty to completely
empty also the delivery pipe and the oil
pump.
- Clean the saw thoroughly.
- Put the blade-cover on. Store the saw in a
dry place, preferably off the ground, and
away from heat sources.
MAINTENANCE CHART
Please note that the following maintenance intervals apply for normal
operating conditions only. If your daily work requires longer than normal
or harsh cutting conditions are present the suggested intervals should be
shortened accordingly.
Before Each Use
After Each
Refueling Stop
Weehly
If Damaged or
Faulty
Complete Machine Inspect (Leaks, Cracks, and Wear)
XX
Controls (on/o switch, safety
button)
Check Operation
XX
Chain Brake Check Operation
XX
Check by Dealer
X
Oil Tank Inspect (Leaks, Cracks, and Wear)
XX
Chain Lubrication Check operation
XX
Saw Chain Inspect (Damage, Sharpness, and Wear)
XX
Check Tension
XX
Sharpen (Check Gauge Depth)
X
Guide Bar Inspect (Damage, and Wear)
XX
Clean Bar groove and Oil Passages
X
Rotate, Lubricate Sprocket Nose and
Deburr
X
Replace
X
Rim Sprocket Inspect (Damage, and Wear)
X
Replace
X
Chain Catcher Inspect (Damage, and Wear)
XX
Replace
X
All Accessible Screws and Nuts Inspect - Retighten
X
Motor crankcase louvers Clean
X
Power cable Inspect (Damage, and Wear)
X
36


Need help? Post your question in this forum.

Forumrules
1

Forum

efco-mt1800

Reset search

  • Efco MT1800 E giving trouble trying to switch on if I turn it on its side it starts but intermittent are new switches available and can I fit myself please Submitted on 22-5-2020 at 12:32

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Efco MT1800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Efco MT1800 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Portuguese, Spanish as an attachment in your email.

The manual is 2,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info