Manual Efco MT1800 (page 35 of 202) (English, German, Dutch, French, Italian, Polish, Portuguese, Portuguese, Spanish)

644119

Zoom out

Zoom in

1/202

RUS

may result in serious injury or death to the

operator or third parties.

CHAIN SHARPENING



WARNING - Always use safety gloves and

goggles while sharpening. Disconnect

the plug from the network before any

operations on the cutting devices.

The pitch of the chain (Fig. 22) is 3/8”x.050”

(Special). Sharpen the chain using protective

gloves and a round file of Ø 4 mm. (5/32”).

Always sharpen the cutters only with outward

strokes (Fig. 21) observing the values given in

Fig. 22.

After sharpening, the cutting links must all have

the same width and length.



Follow the manufacturer’s sharpening

and maintenance instructions for the

saw chain. Decreasing the depth gauge

height can lead to increased kickback.



WARNING - A sharp chain produces well-

defined chips. When your chain starts

to produce sawdust, it is time to sharpen.

Sharpen the chain when the electric saw is

disconnected from the network.

After every 3-4 times the cutters have been

sharpened you need to check the height of

the depth gauges and, if necessary, lower

them using the flat file and template supplied

optional, then round off the front corner

(Fig. 23).



WARNING - Proper adjustment of the

depth gauge is as important as proper

sharpening of the chain.

GUIDE BAR

The guide bars provided with a sprocket at

their tip must be lubricated with grease using a

lubrication syringe (Fig. 24).

Rotate the bar after every 8 hours of duty to

ensure wear is even, thus extending its working

life. Loosen the screw (D, Fig.25) and remove

the tensioning disk (A) from bar (B). Ensure the

rubber washer (C) is not worn or broken. Rotate

the bar and secure the disk with screw. Smear a

drop of threadlocker (Loctite 243 or equivalent)

on the screw to ensure it cannot work loose.

Keep the bar groove and lubrication hole clean

using the bar groove cleaner (Fig. 26).

Check the bar rails frequently for wear and, if

necessary, remove the burs and square-up the

rails using the flat file (Fig. 26).

TRANSPORTION

Carry the electric saw with the blade facing

backward and the blade-cover on (Fig. 28).



WARNING - When transporting the

machine on a vehicle, ensure that it is

firmly and securely fastened using straps or

belts. The machine must be transported in the

horizontal position, also ensuring compliance

with applicable transport regulations for such

machines.

Efco MT1800 E giving trouble trying to switch on if I turn it on its side it starts but intermittent are new switches available and can I fit myself please Submitted on 22-5-2020 at 12:32
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Efco MT1800 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Portuguese, Spanish as an attachment in your email.

The manual is 2,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Efco MT1800 Manual

Product: