Manual Efco MT1800 (page 34 of 202) (English, German, Dutch, French, Italian, Polish, Portuguese, Portuguese, Spanish)

644119

Zoom out

Zoom in

1/202

RUS

- Be extremely careful when working on

slopes or uneven surfaces.

- Stop the motor before setting the chain saw

down.

- Do not lean forward and do not cut above

shoulder height; gripping the saw at the top

of the handle makes it difficult to control and

counteract kickback (Fig. 20).

- Do not use in trees or on steps, this is

extremely dangerous (Fig. 20).

- Ensure that the cable does not snag on

parts of the tree when the machine is in

operation.

- Stop the saw if the chain strikes a foreign

object. Inspect the saw and repair or replace

parts as necessary.

- Keep the chain out of dirt and sand. Even a

small amount of dirt will quickly dull a chain

and increase the possibility of kickback.

- Always keep the handles dry and clean.

- When cutting a limb that is under tension, be

alert for springback so you will not be struck

when the tension in the wood fibre is

released.

- Take great care when cutting small branches

or shrubs which can block the chain, be

thrown back towards you or cause you to

lose your balance.

8. MAINTENANCE



WARNING - The motor is designed so

as not to become overheated during

normal use. A possible overheating can

be caused by worn or badly sharpened

chain, inadequate chain lubrication,

excessive pressure on the electric saw while

cutting, obstruction of the motor sir slits

or an inappropriate extension cord. During

maintenance operations, always wear

protective gloves and make sure that the

plug for mains connection is disconnected.

Inspect the tool before each use to check for

worn or damaged components. Do not use

the chain saw if you notice any broken or

excessively worn parts.

General cleaning

• Keep the tool clean. Remove all woodchips

after each use and before stowing the tool

away.

• Regular and correct cleaning will help to

keep the tool in safe working order and

extend its working life.

• Clean the tool with a dry cloth. Use a brush

to clean hard-to-reach areas of the tool.

• Take special care in cleaning the air intakes

with a brush after each use of the tool. Clear

away any hard to remove debris using

compressed air (max. 3 bar) (Fig.27).



CAUTION - Do not use aggressive or

alkaline chemicals, abrasives or other

detergents or disinfectants to clean the tool;

such products may damage the outer of the

tool.

CHECK/REPLACEMENT OF THE BRUSHES

Every 100 work hours the brushes should be

checked by your authorized servicing dealer.

Replacement is recommended aner 200

work hours. For check of brushes, please call

authorized dealers or workshops.

WARNING - Require the assembly of

original brushes. The brushes must be

replaced in pairs.

EXTRA MAINTANANCE ADVISABLE

It is advisable to inspect the machine by a

specialized technician at an authorized service

network at the end of season, if used

intensively, and every two years if with normal

use.



WARNING: All maintenance operations

not reported in this manual must be

carried out by an authorized Service Center.

To ensure steady and regular electric saw

operation, remember that parts must only be

replaced with ORIGINAL SPARES.



Any unauthorized changes and/or

use of non-original replacement parts

Efco MT1800 E giving trouble trying to switch on if I turn it on its side it starts but intermittent are new switches available and can I fit myself please Submitted on 22-5-2020 at 12:32
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Efco MT1800 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Portuguese, Spanish as an attachment in your email.

The manual is 2,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Efco MT1800 Manual

Product: