Manual Efco MT1800 (page 25 of 202) (English, German, Dutch, French, Italian, Polish, Portuguese, Portuguese, Spanish)

644119

Zoom out

Zoom in

1/202

RUS

TRANSLATION OF ORIGINAL INSTRUCTIONS

INTRODUCTION

For correct use of the machine and to avoid

accidents, do not start working until you have

read this manual carefully. You will find

explanations concerning the operation of the

various parts plus instructions for necessary

checks and relative maintenance.

NOTE: The descriptions and illustrations

contained in this manual are not binding.

The manufacturer reserves the right to

undertake any modifications it deems

necessary without revising this manual.

In addition to the operating instructions, this

manual contains paragraphs that require your

special attention. Such paragraphs are marked

with the symbols described below:

WARNING: where there is a risk of an accident

or personal, even fatal, injury or serious damage

to property.

CAUTION: where there is a risk of damaging the

machine or its individual components.

WARNING

RISK OF HEARING DAMAGE

IN NORMAL CONDITIONS OF USE, THIS MACHINE

MAY EXPOSE THE OPERATOR TO A PERSONAL DAILY

NOISE LEVEL EQUAL TO OR HIGHER THAN

85 dB (A)

CONTENTS

1. EXPLANATION OF SYMBOLS AND

SAFETY WARNINGS _______________ 21

2. ELETTRIC SAW COMPONENTS ______ 22

3. SAFETY PRECAUTION _____________ 22

4. FITTING THE BAR AND CHAIN _______ 26

5. STARTING _______________________ 27

6. STOPPING THE ENGINE ____________ 28

7. USE ____________________________ 28

8. MAINTENANCE ___________________ 30

9. STORAGE ________________________ 32

10. TECHNICAL DATA _________________ 33

11. DECLARATION OF CONFORMITY ____ 34

12. WARRANTY CERTIFICATE __________ 35

13. TROUBLE SHOOTING CHART _______ 36

1. EXPLANATION OF SYMBOLS AND

SAFETY WARNINGS (Fig.1)

1. Read operator’s instruction book before

operating this machine.

2. Wear head, eye and ear protection.

3. This symbol indicates Warning and Caution

4. Immediately disconnect the plug if the

cable is damaged or cut

5. Do not expose the electric saw to rain or

high humidity conditions

6. Chain rotation direction - Maximum cutting

length

7. Double insulation device

8. Specifications

9. Type of machine: ELECTRIC CHAIN SAW.

10. Guaranteed sound power level

11. Serial number

12. CE conformity marking.

13. Year of manufacture

USER INFORMATION

In accordance with Directives

2011/65/CE and 2012/19/CE

on the reduction of hazardous

substances in electrical and

electronic equipment (ROHS)

and the disposal of waste from

such equipment (WEEE)

When the symbol depicting a crossed-out

refuse bin appears on equipment, this means

that it must be collected separately from other

waste at the end of its working life.

When the equipment is no longer serviceable,

accordingly, it should be taken by the user to

a special sorted collection centre for electrical

and electronic waste, or if purchasing a new

product of similar type, returned to the

dealer on a one-for-one basis (takeback

scheme).

Proper sorted collection ensures that the

discarded equipment can be sent subsequently

for eco-friendly recycling, treatment and

disposal; this helps to avoid any possible

negative impact on the environment and

on health, besides enabling the reclamation

of materials used in manufacturing the

equipment.

Unauthorized dumping of waste is

irresponsible, and punishable under statutory

regulations.

Efco MT1800 E giving trouble trying to switch on if I turn it on its side it starts but intermittent are new switches available and can I fit myself please Submitted on 22-5-2020 at 12:32
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Efco MT1800 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Portuguese, Spanish as an attachment in your email.

The manual is 2,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Efco MT1800 Manual

Product: