644163

Efco LR48 PE Comfort Plus Manual

32
Zoom out
Zoom in
Previous page
1/48
Next page
32
49 50 51
Italiano English Français
MANUTENZIONE MAINTENANCE ENTRETIEN
ATTENZIONE!
- Prima di ogni intervento disinserire la spina.
- Spegnere il motore e verificare che tutte le parti in
movimento siano ferme,
- Smontare il sacco raccoglierba,
LAMA (Fig. 49)
ATTENZIONE – Lavorare con guanti di protezione per
verificare lo stato delle lame.
ATTENZIONE – Verificare periodicamente che il bullone
(A, Fig.49) sia serrato a 35 Nm (3.5 kgm).
Se con il trascorrere del tempo la falciatura dell’erba non è più
soddisfacente, probabilmente le lame hanno bisogno di essere
affilate. Una lama male affilata strappa l’erba e provoca un
ingiallimento del prato. Se le lame sono danneggiate o storte
devono essere sostituite.
- L’affilatura delle lame è un’operazione molto delicata. Se non
viene tenuto conto della perfetta equilibratura delle stesse
(Fig.50), possono causare vibrazioni anomale che portano
all’allentamento delle lame con pericolose conseguenze per
l’operatore.
- Le lame devono essere montate con il giusto verso. Il montaggio
sbagliato può causare un errato serraggio con conseguente
allentamento delle lame durante il lavoro con pericolose
conseguenze per l’operatore.
Per questi motivi l’equilibratura e la sostituzione delle lame deve
essere effettuata da un nostro Centro Assistenza Autorizzato.
ATTENZIONE: Non saldare, raddrizzare o modificare la
forma di apparati di taglio danneggiati nel tentativo di
ripararli. Queste operazioni possono determinare il
distacco dell’apparato di taglio e provocare lesioni gravi o
letali.
ATTENZIONE – Sostituire sempre anche il bullone
(A, Fig.49).
ATTENZIONE – Utilizzare sempre lame originali marcate
(Fig.51).
WARNING!
- Disconnect the plug before carrying out any
maintenance operation.
- Stop the engine and make certain that all moving parts
are at a complete standstill,
- Remove the clippings bag,
BLADE (Fig. 49)
WARNING – Work with protective gloves when checking
the condition of the blade.
WARNING – Periodically check that the bolt (A, Fig.49) is
tightened to 35 Nm (3.5 kgm).
If the grass mowing becomes unsatisfactory as time goes by, the
blades probably need to be sharpened. A poorly sharpened blade
pulls out the grass and makes the lawn turn yellow. If the blades
are damaged or crooked, they have to be replaced.
- Sharpening the blades is a very delicate operation. If their perfect
balance is not taken into consideration (Fig.50), they can cause
abnormal vibrations that cause the blades to become loose, with
consequent danger for the operator.
- The blades must be assembled with the right angle. Erroneous
assembly can cause incorrect tightening, with consequent
loosening of the blades when working, with dangerous
consequences for the operator.
This is why the blades must be balanced and replaced by one of our
Authorised Assistance Centres.
WARNING: Never repair damaged cutting attachments by
welding, straightening or modifying the shape. This may
cause parts of the cutting tool to come off and result in
serious or fatal injuries.
WARNING – Always also replace the bolt (A, Fig.49).
WARNING – Always use original marked blades (Fig.51).
ATTENTION !
- Avant toute intervention enlevez la prise.
- Arrêter le moteur et s’assurer que toutes les pièces
mobiles sont arrêtées,
- Démonter le sac de récupération de l’herbe,
LAME (Fig. 49)
ATTENTION – Porter des gants de protection pour vérifier
l’état des lames.
ATTENTION – Vérifier régulièrement que le boulon
(A, Fig.49) est serrés à 35 Nm (3,5 kgm).
Aiguiser les lames dès que l’herbe ne semble plus fauchée
correctement. Une lame mal aiguisée arrache l’herbe et fait jaunir
la pelouse. Remplacer les lames dès qu’elles sont endommagées ou
tordues.
- Aiguiser les lames représente une opération très délicate.
Respecter impérativement leur équilibrage (Fig.50) pour éviter
toute vibration qui risque de les desserrer et mettre l’opérateur
en danger.
- Monter les lames dans le bons sens. Si elles ne sont pas montées
correctement, le serrage s’avèrera incomplet ce qui peut mettre
l’opérateur en danger.
Pour ces raisons, nous vous conseillons de vous adresser à l’un de
nos Centres d’Assistance Agréé pour remplacer ou équilibrer les
lames.
AVERTISSEMENT : Ne tentez jamais de réparer un outil de
coupe endommagé en soudant, redressant ou modifiant
sa forme de quelque façon que ce soit. Cela pourrait
contribuer au délogement de l’outil de coupe et provoquer
des blessures graves, voire mortelles.
ATTENTION – Toujours remplacer également le boulon
(A, Fig.49).
ATTENTION – Toujours utiliser des lames originales
portant le symbole de la marque (Fig.51).
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Efco LR48 PE Comfort Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Efco LR48 PE Comfort Plus in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Efco LR48 PE Comfort Plus

Efco LR48 PE Comfort Plus User Manual - Dutch, Swedish - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info