659051

Efco EF 91 C Manual

79
Zoom out
Zoom in
Previous page
1/176
Next page
9EN
For storage and transport purposes,
some components of the machine are
not installed in the factory and have to be
assembled after unpacking. Follow the
instructions below.
IMPORTANT
The machine is
supplied without engine oil or fuel.
Before starting the engine, ll with oil
and fuel following the instructions given
in the engine manual.
WARNING!
Unpacking and
completing the assembly should be
done on a at and stable surface,
with enough space for machine
handling and its packaging, always
making use of suitable equipment.
3.1 UNPACKING
When unpacking the machine, take care
to gather all individual parts and ttings,
and do not damage the cutting deck when
taking the machine o the pallet.
The packaging contains:
– the machine;
– the steering wheel;
– the seat;
– the front bumper (if provided);
– the battery;
– the grass-catcher (with instructions);
– an envelope containing:
– the instruction manuals and
documents,
– nuts and bolts including a pin for
locking the steering wheel,
– starter keys and a spare 10A fuse.
NOTE
To prevent damage to the
cutting deck, raise it to its maximum
height and take utmost care when
taking the machine o the pallet.
Hydrostatic transmission
To make it easier to move or take the
machine o the pallet, put the
transmission disengagement lever in
position «B» (
4.33).
Disposal of the packaging should be done
in accordance with the local regulations
in force.
3.2 FITTING THE STEERING WHEEL
Put the machine on a at surface and
straighten up the front wheels.
Fit the steering wheel (1) onto the
protruding shaft (2) with the spokes
directed towards the seat.
Line up the hole on the steering wheel
hub with the hole on the shaft and insert
the pin (3) using a hammer.
Make sure the end comes right through to
the opposite side.
NOTE
To avoid damage to the steering
wheel, use a punch or a screw-driver
of the same size as the pin when
hammering it through the hole.
3. UNPACKING AND ASSEMBLY
1
3
2
… 79 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Efco EF 91 C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Efco EF 91 C in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 4,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info