Manual Efco EF 72 C (page 175 of 184) (English, German, Dutch, French, Italian)

659049

175

Zoom out

Zoom in

Previous page

1/184

Next page

29NL

6.4.4 Vervanging van een zekering

De machine is uitgerust met een aantal

zekeringen (1) met verschillend vermo-

gen en met de volgende functies en

kenmerken:

– Zekering van 10 A = bescherming

van de algemene stroomcircuits en

het vermogen van de elektronische

kaart; Het in werking treden van

deze zekering veroorzaakt de stil-

stand van de machine. Tevens gaan

alle lampjes uit op het dashboard.

– Zekering van 25 A = bescherming

van het laadcircuit; wanneer deze zekering in werking treedt, ver-

liest de accu geleidelijk aan zijn lading en ontstaan problemen bij

het starten.

Het vermogen van de zekering is aangegeven op de zekering zelf.

– Zekering van T-6,3 A (Vertraagd)

(2) = bescherming van de alge-

mene stroomcircuits en het ver-

mogen van de elektronische

kaart; Het in werking treden van

deze zekering veroorzaakt de stil-

stand van de machine. Tevens

gaan alle lampjes uit op het dash-

board.

– Zekering van 15 A (2a) =

bescherming van het laadcircuit;

wanneer deze zekering in werking

treedt, verliest de accu geleidelijk

aan zijn lading en ontstaan pro-

blemen bij het starten.

Met motor Honda:

Een doorgebrande zekering dient altijd ver-

vangen te worden door eenzelfde type met hetzelfde vermogen.

Als het u niet lukt de oorzaak van het inwerkingtreden van de beveili-

gingssystemen te verhelpen, neem dan contact op met een erkende

garage.

6.4.5 Het mes demonteren, vervangen en hermonteren

Draag stevige handschoenen bij het han-

teren van het mes.

Vervang altijd een beschadigd of verbo-

gen mes; probeer het nooit te repareren! GEBRUIK ALTIJD

ORIGINELE MESSEN WAAR HET TEKEN OP STAAT !

Deze machine is voorzien voor het gebruik van messen met de code:

84109503/0 of 84109502/0

Het is raadzaam dat de messen per koppel

vervangen worden, vooral in geval van duidelijke verschillen in de

slijtage.

BELANGRIJK

LET OP!

LET OP!

BELANGRIJK

1

2

(T-6.3 Amp)

2a

(15 Amp)

1

When I try to start the Blade, the machine shut off itself Submitted on 5-5-2021 at 16:13
Reply Report abuse
Mower will not drive forward or backwards. Everything else works Submitted on 11-4-2021 at 19:31
Reply Report abuse
Please could someone tell me what type,and what specification battery should be fitted to my Efco EF 72C/12.5H
Thanks. Submitted on 1-6-2020 at 17:29
Reply Report abuse
Hi I have an EFCO EF72 C 12.5 Hp that stalls when I engage the blade. I am sitting on the mower in neutral.
The machine travels forward and reverse fine. I have tried engaging the blades travelling forward and it stalls.
It did hit something but the blades are free to spin Submitted on 26-8-2019 at 17:06
Reply Report abuse
Hi.
The machine stalls when I engage the blades.
I am sitting on the machine in neutral .
The machine travels backwards and forwards but stalls when the blades are engaged.
What could be the reason.
I can't find a repair manual to see what maybe the problem
I really would appreciate some help
It is an Efco EF72 C 12.5 hp Submitted on 26-8-2019 at 17:03
Reply Report abuse
- Hope you sorted this out.. I had a similar problem a while back and it turned out to be the fuel filter. I changed this out as pert of the engine service and everything run fine after that Answered on 10-5-2020 at 13:16
  Vote up (1) Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Efco EF 72 C at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Efco EF 72 C in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info