659049

Efco EF 72 C Manual

163
Zoom out
Zoom in
Previous page
1/184
Next page
17NL
De bandenspanning moet als volgt zijn:
VOOR 1,5 bar
ACHTER 1,0 bar
5.1.4 De beveiligingen (opvangbak of steenbeschermkap) bij de
uitwerpopening monteren
Gebruik de
machine nooit zonder deze beveili-
gingen!
Til het deksel (1) op en bevestig de
opvangbak door de twee scharnierge-
wrichten (2) in de gaten van de twee
steunen (3) te steken.
Indien er gewerkt wordt zonder opvangzak is
er, op aanvraag, een steenbeschermkap (4)
leverbaar die, zoals aangegeven in de bijbe-
horende instructies, op de achterplaat beve-
stigd dient te worden.
5.1.5 Controle van de veiligheid en de doeltreffendheid
van de machine
1. Controleer of de beveiligingen werken zoals aangegeven
( 5.3.7).
LET OP!
2. Controleer of de rem correct werkt.
3. Begin niet te maaien indien het mes trilt of men twijfels heeft
omtrent de scherpe staat van de messen; denk er altijd aan dat:
– Een bot mes rukt het gras uit een veroorzaakt de vergeling van
het gazon.
– Een mes dat niet goed vastzit gaat op abnormale wijze trillen en
is een potentiële gevarenbron.
Gebruik de machine niet indien men niet
zeker is van de doeltreffendheid en veiligheid en contacteer de
Verkoper voor de nodige controles of reparaties.
5.2 GEBRUIK VAN DE MACHINE
5.2.1 De machine starten
Het starten moet altijd in de open lucht
of in een goed geventileerde ruimte gebeuren ! DENK ERAAN
DAT UITLAATGASSEN GIFTIG ZIJN!
Voordat u de motor start:
– open de benzinekraan (1)
(indien aanwezig), toeganke-
lijk vanaf het wielvak achte-
raan links;
– Zet de versnellingspook
( bij modellen met
mechanische aandrijving) of
de hendel van de snelheid-
sregelaar ( bij modellen
met hydrostatische aandrij-
ving) in de vrije stand «N».
GEVAAR!
LET OP!
1
2
3
3
4
1
… 163 …


Need help? Post your question in this forum.

Forumrules
1

Forum

efco-ef-72-c

Reset search

  • When I try to start the Blade, the machine shut off itself Submitted on 5-5-2021 at 16:13

    Reply Report abuse

  • Mower will not drive forward or backwards. Everything else works Submitted on 11-4-2021 at 19:31

    Reply Report abuse

  • Please could someone tell me what type,and what specification battery should be fitted to my Efco EF 72C/12.5H
    Thanks. Submitted on 1-6-2020 at 17:29

    Reply Report abuse

  • Hi I have an EFCO EF72 C 12.5 Hp that stalls when I engage the blade. I am sitting on the mower in neutral.
    The machine travels forward and reverse fine. I have tried engaging the blades travelling forward and it stalls.
    It did hit something but the blades are free to spin Submitted on 26-8-2019 at 17:06

    Reply Report abuse

  • Hi.
    The machine stalls when I engage the blades.
    I am sitting on the machine in neutral .
    The machine travels backwards and forwards but stalls when the blades are engaged.
    What could be the reason.
    I can't find a repair manual to see what maybe the problem
    I really would appreciate some help
    It is an Efco EF72 C 12.5 hp Submitted on 26-8-2019 at 17:03

    Reply Report abuse

    • Hope you sorted this out.. I had a similar problem a while back and it turned out to be the fuel filter. I changed this out as pert of the engine service and everything run fine after that Answered on 10-5-2020 at 13:16

      Vote up (1) Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Efco EF 72 C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Efco EF 72 C in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info