644150

Efco BC240HL Manual

32
Zoom out
Zoom in
Previous page
1/60
Next page
32
53 54 55 56
DS 2400 HL - BC 240 HL
Italiano English Français
UTILIZZO USE UTILISATION
Registrazione dell’accessorio tagliasiepi (Fig.53)
L’angolo del tagliasiepi rispetto al tubo di trasmissione
può essere spostato su 12 posizioni tra 0° (estensione
completa) e 90° (angolo retto) sia verso l’alto che verso il
basso (escursione completa di 180°) (Fig.54).
DS 2400HL - BC 240HL: Esiste inoltre la possibilità di
ripiegare l’accessorio sul tubo di trasmissione (Fig.55)
per facilitarne il trasporto bloccandolo nella apposita
posizione.
ATTEN
ZIONE – È assolutamente vietato avviare il
motore con l’accessorio ripiegato nella posizione di
trasporto.
Sequenza operativa di regolazione:
1. Spegnere il motore
2. Tirare l’impugnatura di regolazione angolare (A, Fig.56)
e ruotarla in senso antiorario per disimpegnare il
meccanismo,
3. Ruotare l’accessorio degli scatti (posizioni) desiderati,
4. Rilasciare l’impugnatura e fare ingranare il perno di
regolazione nel disco selettore (B, Fig.57).
ATTE
NZIONE – Con perno ingranato (dopo la
registrazione) l’impugnatura di regolazione
appoggia nuovamente sulla scatola (Fig.58).
Adjusting the hedgetrimmer (Fig.53)
The angle between the hedgetrimmer and the shaft arm
is adjustable through 12 positions from 0° (fully extended)
to 90° (right angle) both up and down (full range of
movement 180°) (Fig.54).
DS 2400HL - BC 240HL: Fore ease of transportation,
the attachment can also be folded back completely and
locked into a position alongside the shaft arm (Fig.55).
WARNING
– Under no circumstances must the
engine be started when the attachment is in the
folded transport position.
Adjustment procedure:
1. Switch o the engine.
2. Pull the angle adjustment handgrip (A, Fig.56) and
twist anticlockwise to disengage the mechanism.
3. Rotate the attachment to the position desired,
selecting the appropriate hole in the disc.
4. Release the handgrip and ensure the catch pin
engages the hole (B, Fig.57).
WARN
ING – With the pin engaged (having made
the adjustment) the handgrip should come to
rest on the housing as before (Fig.58).
Réglage de l’accessoire taille-haies (Fig.53)
Il est possible de déplacer l’angle du taille-haies sur 12
positions par rapport au tube de transmission, de 0°
(extension complète) à 90° (angle droit), aussi bien vers
le haut que vers le bas (excursion complète de 180°)
(Fig. 54).
DS 2400HL - BC 240HL: Il est également possible de
replier l’accessoire sur le tube de transmission (Fig.55)
pour en faciliter le transport en le bloquant dans cette
position.
ATTENTION
- Il est absolument interdit de démarrer
le moteur lorsque l’accessoire est replié en position
de transport.
Séquence de réglage :
1. Arrêter le moteur,
2. Tirer sur la poignée de réglage angulaire (A, Fig.56)
et la tourner dans le sens inverse des aiguilles d’une
montre pour dégager le mécanisme,
3. Tourner l’accessoire jusqu’à la position choisie,
4. Relâcher la poignée et enclencher le pivot de réglage
dans le disque sélecteur (B, Fig.57).
ATTE
NTION - Lorsque le pivot est enclenché
(après le réglage), la poignée de réglage repose
de nouveau sur le carter (Fig.58).
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Efco BC240HL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Efco BC240HL in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Efco BC240HL

Efco BC240HL User Manual - Dutch, Swedish - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info