644128

Efco 147 Manual

18
Zoom out
Zoom in
Previous page
1/60
Next page
18
25 26
Italiano English Français
AVVIAMENTO STARTING MISE EN ROUTE
OLIO LUBRIFICANTE PER CATENA
Una corretta lubrificazione della catena durante le fasi
di taglio riduce al minimo l’usura tra la catena e la barra,
assicurandone una maggiore durata. Utilizzare sempre olio
di buona qualità (Fig. 25).
ATTENZIONE - É proibito l’uso di olio di recupero!
Utilizzare sempre lubrificante biodegradabile
(eco-lube Efco p.n. 001001552 (5ℓ) - 001001553 (1ℓ))
specifico per barre e catene nel massimo rispetto
della natura e della durata dei componenti della
motosega.
Prima di avviare il motore, assicurarsi che la catena
non sia in contatto con un corpo estraneo.
Con il motore al minimo, la catena non deve girare.
In caso contrario rivolgersi ad un Centro Assistenza
Autorizzato per effettuare un controllo e risolvere il
problema.
Con motore in moto, afferrare sempre saldamente
l’impugnatura anteriore con la mano sinistra
e quella posteriore con la mano destra (Fig. 26).
Verificare che tutte le parti del corpo siano lontane
dalla catena e dalla marmitta.
L’esposizione alle vibrazioni può causare danni alle
persone che soffrono di problemi di circolazione
sanguigna o problemi nervosi. Rivolgersi al medico
se si verificano sintomi fisici quali intorpidimento,
mancanza di sensibilità, riduzione della forza
normale o variazioni del colore della pelle. Questi
sintomi di solito compaiono nelle dita, mani o polsi.
CHAIN LUBRICATING OIL
Correct chain lubrication during the cutting phase reduces
wear to a minimum between the chain and bar thus
prolonging life. Always use a good quality oil (Fig. 25).
WARNING - Never use waste oil. Always use
biodegradable lubrificant (eco-lube Efco p.n.
001001552 (5ℓ) - 001001553 (1ℓ)) which is specific
for bar and chain and also respectful towards nature
and chainsaw’s parts.
Before starting make sure the chain is not
obstructed.
When the engine is idling the chain must not turn.
Otherwise contact an Authorized Service Center to
carry out a check and fix the problem.
When the chainsaw is running, grip the front handle
firmly with your left hand and the back handle with
your right hand (Fig. 26). Check that all parts of the
body are kept away from the chain and muffler.
Over exposure to vibrations can result in blood-
vessel or nerve injury to persons suffering with
blood circulation problems. Seek medical attention
if you experience physical symptoms such
numbness, lack of feeling, reduction in normal
strength, changes in the colour of the skin. These
symptoms normally appear in the fingers, hands or
wrists.
HUILE LUBRIFIANTE POUR CHAINE
Une bonne lubrification de la chaîne pendant les phases de
coupe réduit au minimum l’usure entre la chaîne et le guide, ce
qui en assure une plus longue durée. Utilisez toujours de l’huile
de bonne qualité (Fig.25).
ATTENTION - N’utilisez surtout pas d’huile récupérée!
Utiliser toujours lubrifiant biodégradable (eco-lube
Efco p.n. 001001552 (5ℓ) - 001001553 (1ℓ)) spécifique
pour barre et chaine dans le plus grand respect de
la nature et de la durée des composants de la
tronçonneuse.
Avant de mettre le moteur en marche, veillez à ce
que la chaîne ne soit pas en contact avec des corps
étrangers.
La chaîne ne doit pas tourner quand le moteur est au
ralenti. Sinon, contactez un Centre de Service Agréé de
procéder à une vérification et corriger le problème.
Quand le moteur tourne, saississez toujours
fermement la poignée avant de la main gauche et la
poignée arrière de la main droite (Fig. 26). Ne vous
approchez pas de la chaîne ni du pot d'échappement.
L'exposition aux vibrations peut entraîner des
problèmes aux personnes souffrant de troubles
circulatoires ou de nature nerveuse. Demander
l'avis d'un médecin en cas de symptômes physiques
tels qu'engourdissements, absence de sensibilité,
réduction de la force normale ou variations de la
couleur de la peau. Ces symptômes se présentent
normalement au niveau des doigts, mains ou poignets.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Efco 147 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Efco 147 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info