Manual Efbe-schott GW 900 (page 9 of 20) (English, German, Dutch, French)

713663

Zoom out

Zoom in

1/20



Copies of the I/B. Please reproduce them without any

changes except under special instruction from Team

International BELGIUM. The pages must be reproduced

and folded in order to obtain a booklet A5 (+/- 148.5 mm

width x 210 mm height). When folding, make sure you

keep the good numbering when you turn the pages of

the I/B. Don’t change the page numbering. Keep the

language integrity.

9 SC GW 900 - 120424

Assembly page 9/20

Fax +32 2 359 95 50

INITIAL OPERATION

Before the first using of unit or after decalcifying the unit, please cook by using of fresh water.

The boiled up water please do not drink. Please empty out the water into the wash basin. After

the unit cooled down please repeat the procedure 3 times more. After that please clean the

inner tank by using of cold and clear water.

OPERATION

 Open the lid by turning it anti-clockwise and take it off. Fill in cold drinking water or other

to be warmed up potations. Please always check, that the liquid inside the unit is covering

the bottom of tank, otherwise the unit (heating element) could be damaged. As minimum

mark for filling in some liquids take the hight of the outlet. Never fill in less than this mark.

 Close the lid by turning it clockwise untill it locked in place.

 Stick the power plug into the power socket.

Maximum capacity of the tank: 6,8 litre

BOIL FUNCTION

Attention: Please only boil water. Other liquids (potations) please only warm up!

 Switch on the unit, by turning the function setting switch in position „KOCHEN“. The active

light shows that the unit is ative.

 The content will be warmed up and the unit deactivates automatically as soon as the

water boils. You can discontinue the boil function in every time by turning the function

setting switch in position „AUS“.

 Please note, that after every discontinued boiling process an integrated security switch will

deactive the unit completely. Before next using please push button „NEUSTART“ in order

to reactive the unit.

Warm up function (keep warm function)

 Switch on the unit, by turning the function setting switch in position „WARMHALTEN“. The

active light shows that the unit is ative. After warming up to 70°C till 85°C (depending on

the filling level inside the tank) the temperature will be kept relative constantly. The

temperature will be controlled by an integrated thermostate. During keeping warm

process the active light is only on, when the heating element is on for short time in order to

reheat the liquid. After the thermostate switched off (after rewarming up to 70°C till 80°C

again) the active light is off too, untill the thermostate will switch on the unit again. So the

active light is only on during the termostate activates the heating element.

 You can discontinue the boil function in every time by turning the function setting switch in

position „AUS“.

Spigot

 There are 3 positions for the spigot. In normal position the spigot is closed. If you push the

lever down, the outlet is open and as soon as you unhand the lever, it will go back into

normal position self-acting.

 If you edge up the lever, it will lock in. Now you have your hands free and the outlet is

open permanent untill you push the lever down into normal postion. Than it is closed

again.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Efbe-schott GW 900 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Efbe-schott GW 900 Manual

Product: