Manual Edy EDHC8065 (page 55 of 82) (English, German, Dutch, French)

726227

Zoom out

Zoom in

1/82

Operation

Insert the plug of the connection lead into

the plug socket with protective earth

c o n t a c t . W h e n t h e r e f r i g e r a t o r

compartment door is opened, the internal

lighting is switched on. After the fridge has

been placed in position, wait for 5 minutes

before electricity is supplied. Don’t store

anything until the temperature inside the

fridge becomes low enough.

Starting up and temperature regulation

The temperature selector knob is located

on the top of the refrigerator compartment.

Setting 0 means:

Off.

Clockwise rotate the knob to turn on the

appliance.

Setting 1 means:

Highest temperature, warmest setting.

Setting 7 (end-stop) means:

Lowest temperature, coldest setting.

Important! Normally we advise you select

setting of 2 or 3 0r 4, if you want the

temperature higher or colder please turn

the knob to warmer or colder setting

accordingly. When you turn the knob to

colder which can lead to the more energy

efficiency-Otherwise, it would result the

energy-consuming.

Important! High ambient temperatures

(e.g. on hot summer days) and a cold

setting (position 6 to 7) may cause the

compressor to run continuously or even

non-stop!

Reason: when the ambient temperature is

h i g h , t h e c o m p r e s s o r m u s t r u n

contin uously to maintai n the low

temperature in the appliance.

Changing the light bulb

Bulb

Bulb cover

Screw

Control Box

Bulb fixed block

Warning! If the light bulb is

damaged. DO NOT CHANG IT BY

THE USER!

Changing the light bulb carry out by

inexperienced persons may cause injury

or serious malfunctioning. It must be

replaced by a qualified persons in order to

avoid a hazard. Contact your local Service

Force Center for help.

Before changing the light bulb, switch off

the appliance and unplug it, or pull the

fuse or the circuit breaker.

Light bulb data: 220-240 V, LED

MAX.1.5W.

To switch off the appliance, set the

temperature regulator to position “0”.

Unplug the mains plug.

Press the light bulb cover, and slide it

backwards.

To change the light bulb, undo the screw.

Remove the bulb fixed block, change the

defective light bulb.

Refit the bulb fixed block, the light bulb

cover and the screw.

Put the refrigerator back into operation.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Edy EDHC8065 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Edy EDHC8065 Manual

Product: