Manual Edy EDHC8065 (page 51 of 82) (English, German, Dutch, French)

726227

Zoom out

Zoom in

1/82

The side at which the door opens can be

changed, from the right side (as supplied)

to the left side, if trequired.

Warning! When reversing the door, the

appliance must not be connected to the

mains. Ensure that the plug is removed

from the mains socket.

Tools you will need

Left Hinge Cover

8mm wrench

8mm socket wrench

Monkey wrench

Thin-blade

screwdriver

Cross-shaped

screwdriver

2. Use a putty knife or thin-blade

screwdriver to prize the screw hole cover

which is at the top left corner of the

refrigerator, and the upper hinge cover

which is at the top right corner of the

refrigerator.

Reversing the door

Note: If required you may lay the

refrigerator on its back in order to gain

access to the base, you should rest it

on soft foam packaging or similar

material to avoid damaging the

backboard of the refrigerator. To reverse

the door, the following steps are

generally recommended.

1. Stand the refrigerator upright. Open

the upper door to take out all door

racks (to avoid damage) and then close

the door.

Putty knife

3. Unscrew the special flange self-tapping

screws which are used for fixing the right

upper hinge part by a 8mm socket driver

or a spanner (please support the upper

door with your hand when doing it) .

right upper hinge part

special flange

selftapping screws

4.Remove the upper hinge axis, transfer it

to reversed side and tighten securely, then

put it in a safe place.

① ② ③

5. Remove the upper door from the

middle hinge by carefully lifting the door

straight up.

NOTE: When removing the door, watch

for washer(s) between the center hinge

and the bottom of the freezer door that

may stick to the door. Do not lose.

Reversing the door

upper hinge

cover (right)

screw hole cover

Doorracks

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Edy EDHC8065 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Edy EDHC8065 Manual

Product: