516206

Edimax PS-1207MF Manual

130
Zoom out
Zoom in
Previous page
1/145
Next page
125
13.2.2.1 DHCP
There are many Unix/Linux systems that support DHCP protocol,
and the procedures to configure the DHCP server database are
different. Please refer to the manual of Unix/Linux for the way to
use different DHCP Server. It is highly recommended that the
DHCP server should be located on the same network as the MFP
Server.
13.2.2.2 BOOTP
If you have the BOOTP daemon, bootpd, running on your
UNIX/LINUX system that is accessible by the MFP Server, you can
use the BOOTP protocol to set up the IP address of the MFP
Server. We recommend that the BOOTP server should be located
on the same subnet as the MFP Server. If you use Network
Information Services (NIS) in your system, you may need to rebuild
the NIS map with the BOOTP services before doing the following
BOOTP configuration. To rebuild the NIS map, please refer to your
system documentation.
To configure the IP address data for the BOOTP server, you will
need to log in the host of BOOTP server as the superuser (root).
Perform the following steps to add address entries,
1. Optionally, assign a name corresponding to the MFP Server’s
IP address. You can add this address to the /etc/hosts file, by
adding a line such as:
203.66.191.12 pserver
… 130 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edimax PS-1207MF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edimax PS-1207MF in the language / languages: English as an attachment in your email.

The manual is 3,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info