516207
40
Zoom out
Zoom in
Previous page
1/91
Next page
35
6. UNIX System Network
6.1 Introduction
The print server is available for TCP/IP printing by Unix
LPD (Line Printer Daemon) protocol. The LPD protocol
originated with Unix release is based on the BSD version of
Unix and supported under most versions of Unix.
This chapter explains how to configure the print server for
TCP/IP operation, and how to modify configuration files on
your Unix system to allow printing to the print server. The
configuration examples in this manual follow the syntax for
BSD based Unix systems. Please refer to the related
system documentation for the correct syntax of your
systems.
To configure the print server for LPD printing, perform the
procedures below:
1. Enable Print Servers TCP/IP Support.
2. Set up Print Servers IP address.
3. Verify Print Servers IP Address.
4. Configure remote LPD printing on the host.
5. Print a test page.
In the next sections, we will describe these five procedures
step by step.
6.2 Enable Print Servers TCP/IP Support
The default configuration of the print server is with TCP/IP
support enabled. Anyway, you can configure the print
server to enable TCP/IP support using the configuration
program.
6.3 Setup Print Servers IP Address
The print server must have a unique IP address in order to
be recognized by the network.
You can set up the IP address on the various Unix systems
using any one of the following methods:
1. DHCP (Dynamic Host Configuration Protocol)
2. BOOTP (Bootstrap Protocol)
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edimax PS-1206PWg at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edimax PS-1206PWg in the language / languages: English as an attachment in your email.

The manual is 4,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info