Manual Edimax PS-1206PWg (page 13 of 91) (English)

516207

Zoom out

Zoom in

1/91

1.6 Firmware & Printing Function

The print server provides a complete network printing

solution. The feature set is listed below:

PTPP (Peer-to-Peer-Printing)

TCP/IP (LPR)

IPP Printing

NetWare Bindery Printing

AppleTalk

SMB Printing

2. Hardware Installation

Unpack the print server package and verify that all the

items listed in the section 1.2 are provided.

Connect the print server to the printer you want to share on

the network.

Connect the print server to your network by attached the

network cable to the UTP port of the print server.

Connect the power adapter to the print server. The print

server will perform the Power-On-Self-Test (POST) after it

is powered on. During the POST, the Status and Ready

LEDs will be on. When the LEDs are unlighted, the print

server is ready.

NOTE1: MUST use the power adapter shipped with the print server, do

NOT use any other power adapter from any sources.

NOTE2: To prevent the compatibility problem between print server and

a few printer, it is recommended that you power on the print

server before the printer.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Edimax PS-1206PWg in the language / languages: English as an attachment in your email.

The manual is 4,03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Edimax PS-1206PWg Manual

Product: