Manual Edimax PS-1206MF (page 139 of 145) (English)

516204

139

Zoom out

Zoom in

1/145

134

15. Troubleshooting

1. This product is not found even after searching by the “MFP

Manager”.

 Check if the power adapter and the network cable are

connected to the MFP Server properly.

 Check if the LAN and Ready LEDs are turned on.

 Check if the IP Address of the MFP Server is in the network

segment as your computer.

- If you are not sure the IP Address setting of the MFP Server,

please check the TCP/IP setting of the MFP Server from the

“Server Manager”.

2. The ways to change the IP Address of the MFP Server.

 A DHCP Server is installed in the network

If a DHCP Server is installed, you can setup to let the MFP

Server get IP Address from the DHCP Server automatically.

1. Open “Server Manager” and then select “TCP/IP” setting.

2. Select “Auto IP” and click “Save”.

3. Reboot the MFP Server.

 Set up the IP Address Manually

1. Open “Server Manager” and then select “TCP/IP” setting.

2. Select “Static IP” and enter the IP Address and Subnet

Mask as your computer. Click “Save”.

3. Reboot the MFP Server.

Note:

Set a static IP Address to MFP Server is recommended since

DHCP assignment may dramatically change the IP Address for

MFP Server.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Edimax PS-1206MF in the language / languages: English as an attachment in your email.

The manual is 3,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Edimax PS-1206MF Manual

Product: