Manual Edimax PS-1206MF (page 129 of 145) (English)

516204

129

Zoom out

Zoom in

1/145

124

13.2 Console Mode

To configure the MFP Server for LPD printing, perform the

procedures below:

1. Enable MFP Server’s TCP/IP Support.

2. Set up MFP Server’s IP address.

3. Verify MFP Server’s IP Address.

4. Configure remote LPD printing on the host.

5. Print a test page.

In the next sections, we will describe these five procedures step by

step.

13.2.1 Enable MFP Server’s TCP/IP Support

The default configuration of the MFP Server is with TCP/IP support

enabled. Anyway, you can configure the MFP Server to enable

TCP/IP support using the configuration program.

13.2.2 Setup MFP Server’s IP Address

The MFP Server must have a unique IP address in order to be

recognized by the network.

You can set up the IP address on the various Unix/Linux systems

using any one of the following methods:

1. DHCP (Dynamic Host Configuration Protocol)

2. BOOTP (Bootstrap Protocol)

The MFP Server will use the last two methods to obtain its IP

address automatically if its IP address is configured as Auto

(0.0.0.0).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Edimax PS-1206MF in the language / languages: English as an attachment in your email.

The manual is 3,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Edimax PS-1206MF Manual

Product: