516200
32
Zoom out
Zoom in
Previous page
1/41
Next page
30
8.1.3. WLAN ( for IC-1500Wg only)
Wireless Setting
Wireless connection
Enable or disable the wireless function of the Internet Camera. By default, the function
is disabled.
Network Type
Infrastructure – This operation mode requires the presence of a Wireless LAN Access
Point or Router. All communication is done via the Access Point or Router.
Ad-Hoc – Select this mode if you want to connect to another wireless stations in the
Wireless LAN network without through an
Access Point or Router.
Available Networks
Select the networks listed below and click apply to connect to the specified network.
SSID
The SSID (up to 32 printable ASCII characters) is the unique name identified in a
WLAN ( for IC-1500Wg only). The ID prevents the unintentional merging of two
co-located WLANs.
You may specify a SSID for the card and then only the device with the same SSID can
interconnect to the card. If you want to add one of the networks nearby to the profile list,
pull down the menu, all the networks nearby will be listed and you can add one of them
to the profile list.
Channel
This setting is only available for Ad Hoc mode. Select the number of the radio channel
used for the networking. The channel setting should be the same with the network you
are connecting to.
Basic Rate
The camera will force to the data rate that you selected to transmit data.
Authentication and
Encryption Type
Choose the authentication type you want to use.
“None” means that you don’t want any encryption for wireless. “Open System” means
that you can use WEP for encryption or not to encryption. When you select “Shared
Key”, you must use WEP for encryption. The last option is “WPA-PSK”. When you
select this authentication type, you can encryption your wireless with WPA-TKIP or
WPA-AES.
WPA Pre-Shared Key
The WPA-PSK key can be from 8 to 64 characters and can be letters or numbers. This
same key must be used on all of the wireless stations in the network.
WEP Key Length
You may select 64-bit or 128-bit to encrypt transmitted data. Larger key length will
provide higher level of security, but the throughput will be lower.
WEP Key Format
Hexdecimal – Only “A-F“, “a-f“ and “0-9“ are allowed to be set as WEP key.
ASCII – Numerical values, characters or signs are allowed to be WEP key. It is more
recognizable for user.
Default Key
Select one of the keys (1~4) as the encryption key.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edimax IC-1500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edimax IC-1500 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info