663821
22
Zoom out
Zoom in
Previous page
1/116
Next page
19
IV. Browser Based Configuration Interface
In Managed AP mode some functions of the browser based
configuration interface are disabled. Please use Edimax Pro NMS
on your Controller AP to configure your Managed AP(s).
The multi-language browser-based configuration interface enables you to
configure the access point’s advanced features. The IAP1200 features a range
of advanced functions such as MAC filtering, MAC RADIUS authentication,
VLAN configurations, 802.11ac Wi-Fi, up to 32 SSIDs and many more. To
access the browser based configuration interface:
1. Connect a computer to your access point using an Ethernet cable.
2. Enter the access point’s IP address into the URL bar of a web browser. The
default IP is 192.168.2.2. If the AP is connected to a DHCP server, ensure
you use the correct address.
2. You will be prompted for a username and password. The default username
is “admin” and the default password is “1234”, though it was
recommended that you change the password during setup.
If you cannot remember your password, reset the access point
back to its factory default settings. Refer to I-5. Reset
3. You will arrive at the “System Information” screen shown below.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edimax IAP1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edimax IAP1200 in the language / languages: English as an attachment in your email.

The manual is 3,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Edimax IAP1200

Edimax IAP1200 Quick start guide - Dutch - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info