516153
69
Zoom out
Zoom in
Previous page
1/79
Next page
66
4-2 Troubleshooting
If you encounter any problem when you’re using this wireless network card, don’t panic!
Before you call your dealer of purchase for help, please check this troubleshooting table,
the solution of your problem could be very simple, and you can solve the problem by
yourself!
Scenario Solution
I can’t find
any wireless
access point
/ wireless
device in
‘Site Survey’
function.
1. Click ‘Rescan’ for few more times and see if you can find any
wireless access point or wireless device.
2. Please move closer to any known wireless access point.
3. ‘Ad hoc’ function must be enabled for the wireless device you wish
to establish a direct wireless link.
4. Please adjust the position of network card (you may have to move
your computer if you’re using a notebook computer) and click
‘Rescan’ button for few more times. If you can find the wireless
access point or wireless device you want to connect by doing this,
try to move closer to the place where the wireless access point or
wireless device is located.
Nothing
happens
when I click
‘Launch
Config Utility’
1. Please make sure the wireless network card is inserted into your
computer’s USB port. If the Edimax configuration utility’s icon is
black, the network card is not detected by your computer.
2. Reboot the computer and try again.
3. Remove the card and insert it into another USB port.
4. Remove the driver and re-install.
5. Contact the dealer of purchase for help.
I can not
establish
connection
with a certain
wireless
access point
1. Click ‘Connect’ for few more times.
2. If the SSID of access point you wish to connect is hidden (nothing
displayed in ‘SSID’ field in ‘Site Survey’ function), you have to
input correct SSID of the access point you wish to connect.
Please contact the owner of access point to ask for correct SSID.
3. You have to input correct security key to connect an access point
with encryption. Please contact the owner of access point to ask
for correct security key.
4. The access point you wish to connect only allows network cards
with specific MAC address to establish connection. Please go to
‘About’ tab and write the value of ‘Phy_Addess’ down, then
present this value to the owner of access point so he / she can
add the MAC address of your network card to his / her access
point’s list.
The network 1. Move closer to the place where access point is located.
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edimax EW-7711UTn at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edimax EW-7711UTn in the language / languages: English as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info