516145
32
Zoom out
Zoom in
Previous page
1/41
Next page
27
Parameter Description
B/G Protection If you have a mix of 802.11b and 802.11g wireless clients in the
network, it is recommended to enable the protection mechanism.
This mechanism can decrease the rate of data collision between
802.11b and 802.11g wireless clients. When the protection mode
is enabled, the throughput of the AP will be a little lower due to
many of frame traffic should be transmitted.
Auto – Based on the status of the network and automatically
disable/enable protection mode.
OnAlways enable the protection mode.
OffAlways disable the protection mode.
Preamble 802.11g wireless adapters support both long and short preamble,
but for 802.11b wireless adapters, supporting short preamble is
optional. The throughput will be better when using short preamble,
Long Preamble – 128 bits sync field.
Short Preamble – 56 bits sync field.
Beacon (ms) Here defines the time between two beacons, the default value is
100ms.
TX Power If you want to lower the transmit power of the AP for saving the
power of the system, you can select the lower percentages from
the list. The lower power will cause the lower signal strength and
the coverage range.
Tx BURST Tx BURST enables the AP to deliver better throughput in the
same period and environment.
No forwarding among wireless
clients
Enable this setting to force the wireless clients connected to this
AP not sharing information each other.
Hide SSID If “Hide SSID” checkbox is enabled, the AP will not appear in the
site survey list of any wireless clients. It means only the wireless
clients set the same SSID can connect to the AP. It avoids the AP
being connected by unauthorized users.
Use Short Slot Short slot time is 9 us and long slot time is 20 us.
Auto Channel Selection at next
boot
The AP will select a random channel at next booting.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edimax EW-7618Ug at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edimax EW-7618Ug in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info