663955
10
Zoom out
Zoom in
Previous page
1/17
Next page
9
III. Reset the Extender
If you experience problems with your
extender or if you want to change the
extender to a different operating mode,
you can reset the device back to its factory
settings. This resets all settings back to
default.
1. Press and hold the WPS button for at
least 10 seconds and release when the
white power LED is flashing.
2. Wait for the extender to restart. The extender is ready for setup when the
white power LED displays on.
IV. WPS
If your wireless router/access point
supports WPS (Wi-Fi Protected Setup) then
you can use this method to setup your
wireless extender.
1. Press the WPS button on your wireless
router/access point to activate its WPS.
Please check the instructions for
your wireless router/access point for
how long you need to hold down its WPS button.
2. Within two minutes, press and hold the WPS button on the wireless
extender for two seconds. The extender’s blue WPS LED should flash to
indicate that WPS is in progress.
3. The devices will establish a connection. The extender’s blue WPS LED
should display on for 30 seconds to indicate a successful connection.
The extender can establish either a 2.4GHz or 5GHz connection using the WPS
button. By default the extender will establish a 5GHz connection where available.
Use iQ Setup to extend both 2.4GHz & 5GHz together.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edimax EW-7438AC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edimax EW-7438AC in the language / languages: English as an attachment in your email.

The manual is 2,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Edimax EW-7438AC

Edimax EW-7438AC User Manual - English - 124 pages

Edimax EW-7438AC Quick start guide - German - 17 pages

Edimax EW-7438AC Quick start guide - Dutch - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info