516136
30
Zoom out
Zoom in
Previous page
1/89
Next page
30
WPS Settings
Select which frequency Wi-Fi (2.4GHz or 5Ghz) you
wish to configure WPS settings for.
2.4G / 5G Wi-Fi Protected Setup Information
2.4G or 5G Wi-Fi Protected Setup Information will be displayed here
depending on your selection for WPS Settings (above).
WPS Status
Displays “Configured” or “unConfigured” depending
on whether WPS Settings for the extender have been
configured or not, either manually or using the WPS
button.
Self PIN Code
This is the WPS PIN code of the wireless extender for
use with other WPS-enabled wireless devices.
Device Configure
Configuration options for the devices WPS settings can be found here.
Configuration Mode
(Device is as a AP)
The configuration mode of the extenders WPS setting
is displayed here. “Registrar” means the device acts as
an access point for a wireless client to connect to and
the wireless client(s) will follow the extenders
wireless settings.
Configure via Push
Button
Click Start PBC to activate WPS on the extender.
Input Client PIN Code
Input the wireless clients PIN code here and click
“Start PIN” to activate PIN code WPS. Refer to your
wireless clients documentation if you are unsure of its
PIN code.
The WPS LED ( ) will flash slowly to indicate WPS is active. WPS will remain
active for two minutes. Within two minutes, activate WPS on your client
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edimax EW-7238RPD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edimax EW-7238RPD in the language / languages: English as an attachment in your email.

The manual is 4,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Edimax EW-7238RPD

Edimax EW-7238RPD Quick start guide - German - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info