664006
5
Zoom out
Zoom in
Previous page
1/8
Next page
1. Operating Environment
This switch must be installed and operated within the operating limits of
temperature (0 to 40°C, 32 to 104°F) and humidity (10 to 90%
non-condensing).
Do not place objects on top of the unit.
Do not obstruct any vents on the sides of the unit.
Do not position the unit near any heat sources, such as heaters, radiators,
or direct exposure to the sun.
Prevent water and moisture from entering the unit. If necessary, use a
dehumidifier to reduce humidity.
2. Connecting to network devices
The RJ-45 ports on the switch support auto-MDI/MDIX, which allows
straight-through cross-over type cables to connect this switch to a workstation
or hub.
Connect one end of the network cable to the RJ-45 port on the rear panel, and
connect the other end of the network cable to the RJ-45 port on the network
device. Follow the same procedure to connect other RJ-45 ports on the switch.
The UTP network cables must comply with EIA/TIA 568 specifications and
Category 5 standards for data transmission. Maximum length for UTP cable is
100 meters (300 feet) between the switch and connected devices.
Once the network cable is connected at both ends and the attached network
device is powered on, the green LINK/ACT LED should be lit.
3. Connecting the power
Connect the power adapter to the power connector of the unit; the green
Power LED on the front panel should be lit.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edimax ES-5500M V2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edimax ES-5500M V2 in the language / languages: English as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info