729058
106
Zoom out
Zoom in
Previous page
1/116
Next page
103
IV-3. Troubleshooting
If you are experiencing problems with your BR-6428nS V5, please check below
before contacting your dealer of purchase for help.
If you are experiencing problems immediately after a firmware
upgrade, please contact your dealer of purchase for help.
1. The System LED does not light up.
a. Make sure that the Router Adapter is properly plugged into a power outlet.
b. Make sure the power outlet is active (working) by plugging another electric
device into it.
c. Re-plug the Router Adapter to the power outlet. If the system LED is still
failed to light up, contact your local dealer for technical support.
2. The WAN LED does not light up.
a. Make sure that the Ethernet cable (RJ-45) is properly connected to the
Router Adapter’s Ethernet port.
b. Make sure that the other end of the Ethernet cable (RJ-45) is properly
connected to the computer LAN card or to you Cable/xDSL Ethernet port.
c. Make sure your computer LAN card is properly installed and configured.
d. Make sure your Cable/xDSL broadband access is working and configured
correctly.
e. Contact your local dealer for technical support if the Ethernet LED is still
failed to light up after the above procedures.
3. I can’t access the Internet.
f. Ensure that all cables are connected properly. Try a different Ethernet
cable.
g. Check if you can access the web based configuration interface. If not,
please ensure your computer is set to use a dynamic IP address. Refer to
the user manual for guidance if you are unsure how to do this.
h. Login to the web based configuration interface and go to Internet > WAN
Setup and check that the connection type is correct. If you are unsure
which internet connection type you have, please contact your Internet
Service Provider (ISP).
i. Connect your computer directly to your modem and check if you can access
the internet. If you cant, please contact your Internet service provider for
assistance.
4. I cant open the web based configuration interface.
a. Please ensure your computer is set to use a dynamic IP address. Refer to
the user manual for guidance if you are unsure how to do this.
106


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edimax BR-6428nS V5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edimax BR-6428nS V5 in the language / languages: English as an attachment in your email.

The manual is 2,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info