663838
158
Zoom out
Zoom in
Previous page
1/168
Next page
154
6. I forgot my password.
a. Reset the router to its factory default settings and use the default username
admin and default password 1234.
7. My BR-6288ACL has a weak wireless signal.
Weak signals are usually caused by interference from other devices or obstacles
blocking the BR-6288ACL’s wireless signal:
a. Keep the device away from other radio devices such as microwaves or cordless
phones.
b. Do not put the device in the corner of a room or under/nearby metal.
c. Ensure there are as few obstacles as possible between the BR-6288ACL and your
wireless network device.
In range extender mode, the BR-6288ACL’s weak wireless signal may be in turn
caused by a weak signal from your existing router. It’s important to choose a good
location for the BR-6288ACL in relation to your existing wireless router. The best
location is roughly in the middle between your existing wireless router and the area
you would like to be covered by the BR-6288ACL. If you are too far away from your
existing router, then it is difficult for the BR-6288ACL to receive a wireless signal.
8. A firmware upgrade failed and the BR-6288ACL isn’t working.
Firmware upgrade failures can happen occasionally due to power cuts or
unstable connections. In this scenario, you need to first connect a computer to
one of your BR-6288ACL’s LAN ports using an Ethernet cable. Then you need to
modify your computer’s IP address to 192.168.2.x where x is any value between
3 and 254. Refer to IV-1-2. How to modify the IP address of your computer
if you
need guidance to do so.
From there, you need to go to 192.168.2.1 in a web browser, and you will see
the page below:
158


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edimax BR-6288ACL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edimax BR-6288ACL in the language / languages: English as an attachment in your email.

The manual is 5,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Edimax BR-6288ACL

Edimax BR-6288ACL Quick start guide - German - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info