663840
151
Zoom out
Zoom in
Previous page
1/160
Next page
147
Router Login
Enter this URL in a web browser to run iQ Setup or
configure advanced settings. You must be
connected to the device by Wi-Fi or Ethernet
cable.
Username/Password
This is the default username and password to
access the browser based configuration interface
when you go to the “Router Login” URL (above).
Wi-Fi Network
Name
This is the default Wi-Fi network name for the
device. Search for this name (SSID) and connect to
it in order to access the “Router Login” URL
(above).
MAC
A MAC address is unique to every device and is
used for identification within a network. Your
device’s unique MAC address is displayed here.
PIN CODE
This is your device’s PIN code for Wi-Fi Protected
Setup (WPS).
5. I forgot my password.
a. Reset the router to its factory default settings and use the default username
admin and default password 1234. Default settings are displayed on the product
label on the back of the device, as shown above.
6. My BR-6428nS V3/BR-6228nS V3 has a weak wireless signal in
range extender mode.
a. Weak signals are usually caused by interference from other devices or obstacles
blocking the BR-6428nS V3/BR-6228nS V3’s wireless signal:
b. Keep the device away from other radio devices such as microwaves or wireless
telephones.
c. Do not put the device in the corner of a room or under/nearby metal.
d. Ensure there are as few obstacles as possible between the BR-6428nS
V3/BR-6228nS V3 and your wireless network device.
In range extender mode, the BR-6428nS V3/BR-6228nS V3’S weak wireless signal
may be in turn caused by a weak signal from your existing router. It’s important to
choose a good location for the BR-6428nS V3/BR-6228nS V3 in relation to your
existing wireless router. The best location is roughly in the middle between your
existing wireless router and the area you would like to be covered by the
BR-6428nS V3/BR-6228nS V3. If you are too far away from your existing router,
then it is difficult for the BR-6428nS V3/BR-6228nS V3 to receive a wireless signal.
151


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edimax BR-6228nS-V3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edimax BR-6228nS-V3 in the language / languages: English as an attachment in your email.

The manual is 8,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Edimax BR-6228nS-V3

Edimax BR-6228nS-V3 Quick start guide - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info