663835
157
Zoom out
Zoom in
Previous page
1/167
Next page
153
9. My BR-6208AC has a weak wireless signal.
Weak signals are usually caused by interference from other devices or obstacles
blocking the BR-6208AC’s wireless signal:
a. Keep the device away from other radio devices such as microwaves or cordless
phones.
b. Do not put the device in the corner of a room or under/nearby metal.
c. Ensure there are as few obstacles as possible between the BR-6208AC and your
wireless network device.
In range extender mode, the BR-6208AC’s weak wireless signal may be in turn
caused by a weak signal from your existing router. It’s important to choose a good
location for the BR-6208AC in relation to your existing wireless router. The best
location is roughly in the middle between your existing wireless router and the area
you would like to be covered by the BR-6208AC. If you are too far away from your
existing router, then it is difficult for the BR-6208AC to receive a wireless signal.
10. Do the Internet and LAN ports work the same when the device is
in different modes?
No, the Internet and LAN ports have slightly different functions depending on
the operating mode of the device.
a. In Wi-Fi router mode, the Internet port is for a direct connection to your xDSL
modem. The LAN ports are for wired network clients.
b. In access point mode, the Internet port is not functional. Connect your existing
router to the device’s LAN port, and the other LAN ports can connect wired
network clients.
c. In range extender mode, the Internet port is not functional and the all of LAN
ports are for wired network clients. Do not connect your existing router to the
device’s Internet or LAN ports, as this can cause the device to malfunction.
d. In wireless bridge mode, the Internet port is not functional and the all of LAN
ports are for wired network clients.
e. In WISP mode, the Internet port is not functional and the all of LAN ports are for
wired network clients.
11. A firmware upgrade failed and the BR-6208AC isn’t working.
Firmware upgrade failures can happen occasionally due to power cuts or
unstable connections. In this scenario, you need to first connect a computer to
one of your BR-6208AC’s LAN ports using an Ethernet cable. Then you need to
modify your computer’s IP address to 192.168.2.x where x is any value between
3 and 254. Refer to IV-1-2. How to modify the IP address of your computer if you
157


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edimax BR-6208AC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edimax BR-6208AC in the language / languages: English as an attachment in your email.

The manual is 9,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Edimax BR-6208AC

Edimax BR-6208AC Quick start guide - German - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info