516197
27
Zoom out
Zoom in
Previous page
1/48
Next page
2.4.1 Port Forwarding
The Port Forwarding allows you to re-direct a particular range of service port numbers (from the Internet/WAN Ports) to a
particular LAN IP address. It helps you to host some servers behind the router NAT firewall.
Parameter Description
Enable Port Forwarding Enable Port Forwarding
Private IP
This is the private IP of the server behind the NAT firewall.
Note: You need to give your LAN PC clients a fixed/static IP address for Port Forwarding
to work properly.
Type
This is the protocol type to be forwarded. You can choose to forward “TCP” or “UDP”
packets only or select “both” to forward both “TCP” and “UDP” packets.
Port Range The range of ports to be forward to the private IP.
Comment The description of this setting.
Add Port Forwarding into
the table
Fill in the "Private IP", “Type”, “Port Range” and "Comment" of the setting to be added
and then click "Add". Then this Port Forwarding setting will be added into the "Current
Port Forwarding Table" below. If you find any typo before adding it and want to retype
again, just click "Clear" and the fields will be cleared.
Remove Port Forwarding
into the table
If you want to remove some Port Forwarding settings from the " Current Port Forwarding
Table", select the Port Forwarding settings you want to remove in the table and then click
"Delete Selected". If you want remove all Port Forwarding settings from the table, just
click "Delete All" button. Click "Reset" will clear your current selections.
Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other advance sections
or start using the router (with the advance settings in place)
27
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edimax BR-6104K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edimax BR-6104K in the language / languages: Dutch as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info