516197
21
Zoom out
Zoom in
Previous page
1/48
Next page
2.1.3 Remote Management
The remote management function allows you to designate a host in the Internet the ability to configure the Broadband
router from a remote site. Enter the designated host IP Address in the Host IP Address field.
Parameter Description
Host Address
This is the IP address of the host in the Internet that will have management/configuration
access to the Broadband router from a remote site. This means if you are at home and
your home IP address has been designated the Remote Management host IP address
for this router (located in your company office), then you are able to configure this router
from your home. If the Host Address is left 0.0.0.0 this means anyone can access the
router’s web-based configuration from a remote location, providing they know the
password.
Click the Enabled box to enable the Remote Management function.
Note: When you want to access the web-based management from a remote site, you
must enter the router’s WAN IP address (e.g. 10.0.0.1) into your web-browser followed
by port number 8080, e.g. 10.0.0.1:8080 (see below). You’ll also need to know the
password set in the Password Setting screen in order to access the router’s web-based
management.
Port The port number of remote management web interface.
Enabled Select “Enabled” to enable the remote management function.
Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other advance sections
or start using the router (with the advance settings in place)
2.2 WAN
Use the WAN Settings screen if you have already configured the Quick Setup Wizard section and you would like to change
your Internet connection type. The WAN Settings screen allows you to specify the type of WAN port connect you want to
establish with your ISP. The WAN settings offer the following selections for the router’s WAN port, Dynamic IP, PPPoE,
PPTP, Static IP Address, L2TP, Telstra Big Pond, DNS and DDNS.
21
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edimax BR-6104K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edimax BR-6104K in the language / languages: Dutch as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info