Manual Edimax AR-7288WnB (page 80 of 93) (English)

664366

Zoom out

Zoom in

1/93

 802.11n Protection: The 802.11n standards provide a protection method

so 802.11b/g and 802.11n devices can co-exist in the same network

without “speaking” at the same time.

 Support 802.11n Client Only: Only stations that are configured in 802.11n

mode can associate.

 Multicast Rate: Select the multicast transmission rate for the network.

The rate of data transmission should be set depending on the speed of

your wireless network. You can select from a range of transmission speeds,

or you can select Auto to have the Router automatically use the fastest

possible data rate and enable the Auto-Fallback feature. Auto-Fallback

will negotiate the best possible connection speed between the Router

and a wireless client. The default value is Auto.

 Basic Rate: Select the basic transmission rate ability for the AP.

 Fragmentation Threshold: Packets that are larger than this threshold are

fragmented into multiple packets. Try to increase the fragmentation

threshold if you encounter high packet error rates. Do not set the

threshold too low, since this can result in reduced networking

performance.

 RTS Threshold: This value should remain at its default setting of

2347.Should you encounter inconsistent data flow, only minor reductions

are recommended. Should you encounter inconsistent data flow, only

minor reduction of the default value, 2347, is recommended. If a network

packet is smaller than the preset RTS threshold size, the RTS/CTS

mechanism will not be enabled. The Router sends Request to Send (RTS)

frames to a particular receiving station and negotiates the sending of a

data frame. After receiving an RTS, the wireless station responds with a

Clear to Send (CTS) frame to acknowledge the right to begin transmission.

The RTS Threshold value should remain at its default value of 2347.

 DTIM Interval: (Delivery Traffic Indication Message) Enter a value

between 1 and 255 for the Delivery Traffic Indication Message (DTIM.) A

DTIM is a countdown informing clients of the next window for listening to

broadcast and multicast messages.

 Beacon Interval: A beacon is a packet of information that is sent from a

connected device to all other devices where it announces its availability

and readiness. A beacon interval is a period of time (sent with the beacon)

before sending the beacon again. The beacon interval may be adjusted in

milliseconds (ms). Default (100) is recommended.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Edimax AR-7288WnB in the language / languages: English as an attachment in your email.

The manual is 7,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Edimax AR-7288WnB Manual

Product: