810818
25
Zoom out
Zoom in
Previous page
1/40
Next page
25
ENGLISH
USER CONTROLS (REMOTE CONTROL)
- ON/OFF
- Switch-on/switch-off
- Manual mode setting
Power setting
Fan setting
- Automatic mode setting
Temperature setpoint setting
Fan setting
- RELAX function
- From the Menu screen:
Pellet Load (shown only when the product is OFF)
Stand By
Crono
Night (shown only when the product is ON)
Date / time
Display
Language
Beep
Info (technician only)
Technical Menu (technician only)
We describe the procedures below.
ON/OFF
hold the ON/OFF button down to turn the product ON.
When ON, the product has a flame (ignition phase,
etc.) when there is a heating demand.
Switch-on/switch-off
The ON/OFF button switches the product on (starts
the ignition phase) or off (starts the switch off phase)
manually in Manual mode only.
In Automatic mode, the product responds to the
heating demand.
Setting Manual/Automatic
Press the OK button for two seconds to switch from
manual to automatic or vice versa.
In Manual mode, the display reads “Man”.
In Automatic mode, the temperature displays.
In automatic:
Set Room Temperature (read by the remote control,
this should be positioned in the room the product is
installed in).
Set the temperature setpoint (Set) with the “+” and “-”
buttons.
In manual:
Power setting
Set the power level (displayed by the flame symbol)
with the “+” and “-” buttons.
The power level displays next to the flame symbol.
Ventilation setting
Follow the instructions below to manually regulate the
power levels of the fan.
Press “OK” once.
The fan setting displays, next to the blade symbol
representing the fan.
Set the fan level with the “+” and “-” buttons.
The blades fill in to indicate the current setting.
Confirm by pressing the OK button for two seconds.
The fan setting can also follow the room temperature
demand (reduce when the temperature is close to the
desired temperature or increase vice versa)
To activate this mode, press the + button to above the
maximum fan setting. The letter “A” will appear next to
the blade symbol.
THE NUMBER NEXT TO THE FAN BLADE OR FLAME
ONLY DISPLAYS WHILE THE SETTING IS BEING
MADE.
USER INSTRUCTIONS
USER
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edilkamin Vyda Air Tight at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edilkamin Vyda Air Tight in the language / languages: English as an attachment in your email.

The manual is 4.52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Edilkamin Vyda Air Tight

Edilkamin Vyda Air Tight Usermanual and installation guide - German - 40 pages

Edilkamin Vyda Air Tight Usermanual and installation guide - Dutch - 40 pages

Edilkamin Vyda Air Tight Usermanual and installation guide - French, Italian - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info