810841
26
Zoom out
Zoom in
Previous page
1/40
Next page
26
ENGLISH
USER INSTRUCTIONS
- Relax function
Natural convection function (without ventilation) with
automatic power limiting.
This function is available in all modes: automatic,
manual and crono.
Hold down the “M” button for two seconds to activate
the Relax function.
The display reads the symbol, as shown below.
Hold it down again to deactivate it.
The product reduces its power output and after a few
minutes switches the fan off too.
Pressing OK or “+” or “-” in this mode has no effect.
Menu
Press the “M” button to display the menu.
When the menu displays, the buttons have the
following functions:
“+” : scroll up
“-” : scroll down
press and release “OK”: enter menu option
press and release “M”: quit menu option
Press the ON/OFF button to confirm and return to the
main screen.
- Stand by
When the Stand by function is active, in automatic
and crono modes, the product shuts off when the
temperature setpoint is reached and turns on again
when the room temperature drops.
When the Stand By function is not active, the product
sets itself to minimum power when the temperature
setpoint is reached.
To access the function from the main menu (as
indicated in the Menu section above), press the M
button. Scroll using the +/- buttons and select the
function by pressing the “OK” button.
Use the “+/-” buttons to select OFF or ON.
To exit without saving, press the “M” button
If you selected ON, the display shows the minutes for
which the product will continue running at minimum
power even when the temperature setpoint has been
reached.
Use the “+/-” buttons to increase or decrease this time
in minutes.
Press “OK” for two seconds to confirm and return to
the previous menu level.
Press the ON/OFF button to return to the main screen.
The product is programmed by default with
a delta of +/- 1 °C to optimise comfort.
The technician can change this setting
during commissioning to suit the needs of
the application.
The display shows the temperature
rounded down. This means that 20.1°C and
20.9°C are indicated as “20°C”.
E.g., with the room temperature set to
20°C, the product will enter modulation
mode/switch off when a temperature of 21°
C is reached and will switch on again below
19° C.
PELLET LOAD
STAND BY
CRONO
NIGHT
DATE-TIME
DISPLAY
LANGUAGE
BEEP
INFO
TECHNICAL MENU
PELLET LOAD
STAND BY
CRONO
NIGHT
DATE-TIME
DISPLAY
LANGUAGE
BEEP
INFO
TECHNICAL MENU
USER
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edilkamin Vyda 2 Air Tight C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edilkamin Vyda 2 Air Tight C in the language / languages: English as an attachment in your email.

The manual is 1.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Edilkamin Vyda 2 Air Tight C

Edilkamin Vyda 2 Air Tight C User Manual - German - 40 pages

Edilkamin Vyda 2 Air Tight C User Manual - Dutch - 40 pages

Edilkamin Vyda 2 Air Tight C User Manual - French, Italian - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info