499666

Edilkamin TELECOMANDO - Display Manual

6
Zoom out
Zoom in
Previous page
1/20
Next page
6
ENGLISH
TEMPERATURE DETECTED BYTHE REMOTE CONTROL
The remote control is equipped with an internal sensor to detect the room temperature and display it in real
time.
The detected temperature is transmitted periodically to the control board of the insert/stove if the transmis-
sion LED of the remote control and the receiving sensor of the synoptic panel of the insert/stove are in each
other's field of view.
If the temperature of the remote control does not reach the control board of the insert/stove for over 30
minutes, the temperature detected by the sensor connected to the synoptic panel is used.
SELECTINGTHE OPERATINGMODE
The following functions can be scrolled through and set by briefly pressing the "M" button:
temperature adjustment in automatic mode
manual adjustment of the power
manual adjustment of the ventilation
USINGTHE “EASY TIMER” PROGRAM
The new remote control allows you to manage a new timer program that is very intuitive and easy to use:
- If the insert/stove is on: a delayed shutdown can be set from the remote control - from one to twelve
hours. The remaining time for the scheduled shutdown is shown on the display of the synoptic panel.
- If the insert/stove is off: a delayed ignition can be set from the remote control - from one to twelve hours.
The remaining time for the scheduled ignition is shown on the display of the synoptic panel.
- Setting: proceed as follows to set the timer:
a)Press the "A" button and the icon will light up on the display, thereby confirming the “Easy timer”
program has been accessed.
b) Set the hours by pressing the +/-buttons, for example:
c) Point the remote control towards the synoptic panel receiver
d) Confirm the setting by pressing the "A" button for a few seconds; the icon will go off and the remai-
ning time will appear on the synoptic panel after which the “Easy timer” setting will intervene.
e) Repeat points a), b), c), d) to cancel the setting, and set the hours to "00H"
BLOCKED KEYPAD
The remote control buttons can be blocked so as to prevent it from going on accidentally.
Press the Aand M buttons simultaneously and the key symbol will light up confirming that the keys
have been blocked. Press the Aand M buttons simultaneously once again to unblock the keypad.
sk tecnica TELECOMANDO multilingua cod. 633310.qxp 19/02/2010 11.28 Pagina 7
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Edilkamin TELECOMANDO - Display at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Edilkamin TELECOMANDO - Display in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 5,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info